GUANGZHOU KECO M&E CO. LTD. KR06B ユーザーズマニュアル
S i m p l e a n d f l a t d e s i g n o f b u t t o n ;
I n d e p e n d e n t b u t t o n d e s i g n f o r d o t m o v i n g ;
i n t e r m e d i a t e s t o p p o s i t i o n ;
P r o g r a m m i n g o f c o d i n g a n d l i m i t b y r e m o t e c o n t r o l .
Feature
Frequency: ASK433.92MHZ
Emitting Power: <10mW
Battery: 2*AAA 1.5V
Emitting Power: <10mW
Battery: 2*AAA 1.5V
Specifications:
Functions and Setting
Coding(Receiver is provided)
1、When the receiver enters the coding mode, press the [button
Coding] within 15 seconds, and the LED inreceiver flashes 3
times to tell it is done.
2、Within 3 seconds once the receiver is powered on,press the
[button F1], the receiver’s LED get on, and then within 15
seconds, press the button Coding,andthe LED in receiver
flashes 3 times to tell it is done.
Coding] within 15 seconds, and the LED inreceiver flashes 3
times to tell it is done.
2、Within 3 seconds once the receiver is powered on,press the
[button F1], the receiver’s LED get on, and then within 15
seconds, press the button Coding,andthe LED in receiver
flashes 3 times to tell it is done.
Reverse turning(Receiver is provided)
1、When the receiver enters the coding mode, press the [button Down]
within 15 seconds, and the LED in receiver flashes 3 times to tell it
is done.
2、Keep pressing the [button SET] and [button DOWN] simultanously
for 3 seconds the LED in the receiver flashes 3 times to tell it is
done.
within 15 seconds, and the LED in receiver flashes 3 times to tell it
is done.
2、Keep pressing the [button SET] and [button DOWN] simultanously
for 3 seconds the LED in the receiver flashes 3 times to tell it is
done.
Clearing(Receiver is provided)
Keep pressing the [button SET] and [button UP] simultanously for
3 seconds the LED in the receiver flashes 3 times.Then within 15
seconds, keep pressing the [button SET] and [button UP]
simultanously for 3 seconds again,the LED in the receiver flashes
3 times to tell it is done.
3 seconds the LED in the receiver flashes 3 times.Then within 15
seconds, keep pressing the [button SET] and [button UP]
simultanously for 3 seconds again,the LED in the receiver flashes
3 times to tell it is done.
Limit Setting(Receiver is provided)
for 3 seconds the LED in the receiver flashes 3 times,then the system
enters limit setting mode, please adjust the limit for both ends and
confirm each limit by pressing [button F1], then the LED in the receiver
flashes for 3 time to tell it is done.
enters limit setting mode, please adjust the limit for both ends and
confirm each limit by pressing [button F1], then the LED in the receiver
flashes for 3 time to tell it is done.
Intermediate stop position(Receiver is provided)
Wireless operating
Press the button Intermediate stop position, the motor automatically
moves to the preset intermediate stop limit position.
moves to the preset intermediate stop limit position.
[Button UP], makes the system working and open the curtain.
[Button Down], makes the system working and close the curtain.
[Buton Stop], stop moving.
[Button Upward] dot moving, the motos moves as dot moving mode.
[Button Downward] dot moving, the motor moves as dotmoving mode.
[Button Intermediate Stop position], the motors travels to the preset
intermediate stop limit position.
[Button Down], makes the system working and close the curtain.
[Buton Stop], stop moving.
[Button Upward] dot moving, the motos moves as dot moving mode.
[Button Downward] dot moving, the motor moves as dotmoving mode.
[Button Intermediate Stop position], the motors travels to the preset
intermediate stop limit position.
Channel change(Not availble in single channel type)
The left button for change, it goes to the previous channel.
The right button for change, it goes to the next channel.
The LEDs are all on is one channel.
The right button for change, it goes to the next channel.
The LEDs are all on is one channel.
KR06B Remote control
-
User manual for KR06B-5
KR06B-2
KR06B-1
KR06B-1
Keep pressing the button F1 and button Stop simultanously
SET
F1
Channel Change -
Front view
LED
Coding/Up
Stop
Down
Upward Dot Moving
Downward Dot Moving
Intermediate Stop
Position
Channel Change +
Rear view
Label
Battery Cover
Set
F1
Read
carefully before use and keep for future reference