Lono LLC 20140911 ユーザーズマニュアル
Mount back panel
Take Lono’s back panel and mount it
to wall using the two mounting screws
included in the packaging.
Take Lono’s back panel and mount it
to wall using the two mounting screws
included in the packaging.
2
Power device
Plug 120V power supply into nearby
outlet, and connect it to Lono.
Plug 120V power supply into nearby
outlet, and connect it to Lono.
Connect wiring
Connect each valve wire into a zone wire
connector on the device, numbered 1-20.
The “C” wire connectors at the top are
for common wires.
Connect each valve wire into a zone wire
connector on the device, numbered 1-20.
The “C” wire connectors at the top are
for common wires.
3