Precision Governors LLC 9557 ユーザーズマニュアル
2322 Seventh Avenue --- Rockford, IL 61104 --- 815.229.5300 --- Fax --- 815.229.5342
www.precisiongovernors.com
Page 1 of 5
Precision Governors, LLC PN 9557
Industrial Hand Held Remote Transmitter
Industrial Hand Held Remote Transmitter
Features:
The transmitter is a rugged handheld industrial grade remote control.
Sized for one handed operation.
Transmits the status of 1 to 8 buttons for a receiving unit to use as appropriate for
Sized for one handed operation.
Transmits the status of 1 to 8 buttons for a receiving unit to use as appropriate for
the application.
Buttons can be pressed individually or in any combination.
24 bit addressing to allow receivers to be paired to individual transmitters.
User adjustable address
The user can enable or disable individual buttons after address adjustment.
Powered by two AA batteries to ensure minimal service interruptions. Battery
24 bit addressing to allow receivers to be paired to individual transmitters.
User adjustable address
The user can enable or disable individual buttons after address adjustment.
Powered by two AA batteries to ensure minimal service interruptions. Battery
lifetime is estimate to be in excess of 100 hours of actual transmission time.
Status indicator to indicate transmissions is active.
Operation:
Depress the desired buttons as needed. The remote will transmit the button status while
one or more buttons are depressed. The LED centered between and above buttons 7 & 8
will illuminate while the unit is transmitting. Refer to Figure 1 for a picture of the remote
and LED location.
Note: please refer to applicable receiver “button configuration” documentation for the
button functionality. The application is determined by the receiving controller rather than
the transmitter.