Shenzhen Hastech industries Co. Ltd HW098-R ユーザーズマニュアル
Specifications
Wireless Specification
2.4G wireless
Product Dimensions
285 × 122 × 19mm / 11.2 ×
4.8 × 0.7in (L × W × H)
4.8 × 0.7in (L × W × H)
Product Weight
189g / 6.7 oz
Operating Range
Up to 10 meters / 33 feet
Modulation System
MSK
Battery Type
2 AAA batteries
Working Temperature
-10
°C
to +55
°C
Key Life
3 million clicks
System Requirements
Windows 8 / Windows 7 /
Windows Vista / Windows
XP
Windows Vista / Windows
XP
Setup Instructions
1. Open the battery cover on the back of the keyboard and take it off.
2. Insert two AAA batteries (not included).
3. Take out the USB wireless receiver from the battery slot and plug it into your computer’s USB
2. Insert two AAA batteries (not included).
3. Take out the USB wireless receiver from the battery slot and plug it into your computer’s USB
port.
4. Replace the battery cover and you are ready to begin typing.
Replacing Batteries
When the batteries are running low, the LED indicator will turn red and begin to flash. Replace the
AAA batteries to continue typing.
AAA batteries to continue typing.
Troubleshooting
If you have any problems using the keyboard, or you’re using a new Anker receiver, try the following
steps to pair the keyboard and receiver together again:
1. Unplug the USB receiver and then plug it back into the computer USB port.
2. Press the ESC and Q keys at the same time. The LED indicator will flash rapidly for about 5 seconds
and then go off. The receiver is now successfully paired to your keyboard.
steps to pair the keyboard and receiver together again:
1. Unplug the USB receiver and then plug it back into the computer USB port.
2. Press the ESC and Q keys at the same time. The LED indicator will flash rapidly for about 5 seconds
and then go off. The receiver is now successfully paired to your keyboard.