Atoms Labs LLC AWF08 ユーザーズマニュアル
$:)
—
——
—— —
—
——
—
—— —
(2)
(3)
(4)
(5)
(7)
(8)
—
—
(1)
1. Packing content
Quick Start Guide of Wireless IP Camera
Leds
●IPC186: 2pcs Leds, with 10m night vision
●IPC369: 8pcs Leds, with 15m night vision
●IPC218: 12pcs Leds, with 15m night vision
●IPC369: 8pcs Leds, with 15m night vision
●IPC218: 12pcs Leds, with 15m night vision
Power Port
●
(
)
●
(
)
IPC186/IPC369:Mini USB Power Port DC5V 1A
IPC218:Power interface DC12V 1A
IPC218:Power interface DC12V 1A
Reset Button
Reset Button ((see bellow 2.2)
Antenna
Antenna ( for IPC218 only )
LENS
720P /960P /1080P: 1.44mm
1536P(3.0mega pixel): 1.45mm
1536P(3.0mega pixel): 1.45mm
3. Get the APP and register an account
(1) iPhone:
.
search“Pano360S”in Apple Store
Android System:
.
search“Pano360S”.
in Google play
(2)
scan the QR code.
3.1 You have 2ways to get an APP
Pano360S
3.2 Open the APP
(1).
.
(see 3.2.1)
(2).
(2).
.(see 3.2.2)
Power on the camera and wait about 60s for camera stand-by.
** For Android phone users, in order to connect the camera
more fast,App will get the
wifi information around
you. Please click “allow”
to obtain permissions.
** For Android phone users, in order to connect the camera
more fast,App will get the
wifi information around
you. Please click “allow”
to obtain permissions.
Choose “register” to
register an account
Input an user name
and password
4.1 If you want to record videos, ensure
you have inserted TF card or SD card into the
camera (camera maximum support 128GB TF card).
Note: Camera works well without TF card, but recording/
playback function is disable.
4.2 Before wifi configuration, make sure your mobile phone has
connected to wifi. (**Note: camera DO NOT support 5.8G wifi,
please use a 2.4G wifi router**). Please go to the area with
stronger wifi signal to configure the camera.
you have inserted TF card or SD card into the
camera (camera maximum support 128GB TF card).
Note: Camera works well without TF card, but recording/
playback function is disable.
4.2 Before wifi configuration, make sure your mobile phone has
connected to wifi. (**Note: camera DO NOT support 5.8G wifi,
please use a 2.4G wifi router**). Please go to the area with
stronger wifi signal to configure the camera.
(3).The system will ask if you want to blind
your email address,If you blind your
email address, you can get back your
password in case you forget the
password.If you don't need, you can
click “skip” for next step.(see 3.2.3)
(3.2.1)
(3.2.2)
4. Add and Configure camera
6)
(4) Network config . Choose your WIFI and enter password.
The camera start config. (see 4.3.4)
(5)
The camera start config. (see 4.3.4)
(5)
(see 4.3.5)
Pan-tilt-Zoom. (see 4.3.6)
Input a password. If you don’t need to setup a password,
you can “skip” for next step.
(
(
You can see the camera live view. it support Digital
—
(6)
●IP camera * 1
●Power adaptor 1
(DC5V 1A for IPC186 / IPC369
DC12V 1A for IPC218)
●Power cable 1
●Reset pole 1
RJ45 Network Cable 1 (for IPC218 only)
●Manual,screws
*
)
(
*
*
●
*
(3 2 1)
Register
Forget?
(3 2 2)
NET
RJ45 Network Port (IPC186 do not have )
(3.2.3)
he
(3 2 3)
Skip
Radiator
Radiator IPC369 / IPC218 do not have
(
)
Video save in TF card,Support Max128G for
Video storage(TF card not included in package)
Video storage(TF card not included in package)
TF card port
Way2:
(Only for IPC369,IPC218)
1) Connect the camera with network cable.(4.3.7)
2) Click “+” in right top corner in APP,and choose “adding
2) Click “+” in right top corner in APP,and choose “adding
networking device”. (4.3.8)
3) Choose“Cloud ID” to scan camera Barcode,you can see
the live view. (4.3.9)
4)
Wired Configuration
(
(
(
(
(
Before unplug the network cable, you need to setup
wireless configuration.(4.3.10) (4.3.11)
(5) Enter into “setting”, choose “network configure”.
(6) Choose your wifi name and password.
(7) Please wait about 10s for camera setup, you will see the
LED Indicator flash every 0.5s and then keeps on. You
need to wait 1-2minutes for camera re-start, when the
image comes out, you can unplug the network cable.
Wireless configuration is successful.
(5) Enter into “setting”, choose “network configure”.
(6) Choose your wifi name and password.
(7) Please wait about 10s for camera setup, you will see the
LED Indicator flash every 0.5s and then keeps on. You
need to wait 1-2minutes for camera re-start, when the
image comes out, you can unplug the network cable.
Wireless configuration is successful.
2. Diagram
Speaker
LED
Lens
TF card port
Lens
LED
Speaker
LED
Lens
Reset
Power port
Radiator
LED Indicator
Power port
NET
TF Card port
LED Indicator
NET
Power interface
IPC186
IPC218
IPC369
Antenna
TF card port
Reset
Reset
MIC
TF card port
Speaker
Speaker (IPC218
)
do not have
LED Indicator
LED Indicator ((see bellow 2.1)
MIC
For two way audio ( IPC218 do not have )
LED Indicator
MIC
QR Code
(4.3.5)
(4 3 5)
(4.3.1)
(4.3.2)
(4.3.4)
(4 3 2)
(4.3.3)
(4 3 1)
Tap to add device
(4.3.5)
(4 3 3)
(4 3 4)
(4 3 5)
2.1 LED Indicator
● LED Indicator flashes every 2seconds (2s)-- AP Mode, means camera
ready to be connect. Need to wait this step before you add a camera
into the APP. ● LED Indicator flashes every 0.5s--Network Switching
or Sound matching mode. ● LED Indicator lights keeps on–
Configure Successfully, Camera is working well.
Configure Successfully, Camera is working well.
● Poke the reset button at 3-5s,camera enter“sound matching mode”,this
step can be neglected.● for Indoor camera with audio: Poke the reset
button at 10-15s,camera sounds: “ restore to factory setting”.
button at 10-15s,camera sounds: “ restore to factory setting”.
● For IPC218 without audio: Poke the reset button at 20s until you see the
LED Indicator OFF, the Indicator will Off for 10s and then will star on, it
means the camera “restore to factory setting”sucessfully.
means the camera “restore to factory setting”sucessfully.
2.2 Reset button
● Poke the reset button at 6-10 seconds , camera enter to “AP mode”.
4.3 Here we suggest 2 ways to connect camera.
Way 1: Wireless Configuration(AP Configuration)
*Before you add a camera,make sure the camera LED indicator
Way 1: Wireless Configuration(AP Configuration)
*Before you add a camera,make sure the camera LED indicator
is flashing every 2seconds.
(1) Open the wifi setting in your mobile phone:For Android System,
you just need to make sure the camera ID is in the list ,do not
need to choose it ; for IOS System, find the camera ID in the
wifi list and need to choose it . (see 4.3.1)
(2) Click “+” in right top corner in APP. (see 4.3.2)
you just need to make sure the camera ID is in the list ,do not
need to choose it ; for IOS System, find the camera ID in the
wifi list and need to choose it . (see 4.3.1)
(2) Click “+” in right top corner in APP. (see 4.3.2)
(3) Choose “add
a
new
device”, you will see camera ID in
the list. click “ next ”. (see 4.3.3)
+
(4.3.6)
(4.3.6)
(4.3.7)
IPC186
IPC369
IPC218
(4.3.3)
(4 3 3)
Add a New Device
After configuring the new Device and
replacement of Device
replacement of Device
Adding
networking device
Added ID LAN IP DDNS
, /
Add device