Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Shenzhen Fitcare Electronics Co. Ltd
  4. RC900
  5. ユーザーズマニュアル

Shenzhen Fitcare Electronics Co. Ltd RC900 ユーザーズマニュアル

ダウンロード
ページ / 2
数据收集器 / RC900   版本：2016-4-25
RC900 中英说明书
材料：105 铜版纸  单色
切线：
折线：
使 用 手 册
正 面
背 面
部件
按键与指示灯说明
设置
主机
USB充电器
(可选）
USB充电线
使用手册
110 mm
70 mm
技术说明
责任声明
使 用 手 册
按键
LED蓝灯
LED红灯
按键操作
1. 长按按键 3S，设备开机、关机 , 蓝灯亮 2s。
2. 关机状态下，长按按键 10S，清除网络信息，
蓝色 LED 灯快速闪烁，亮 100ms 灭 100ms。
led 灯状态
网络状态
网络已连接：蓝灯亮 400ms 灭 400ms。
网络未连接：蓝灯每 2s 亮 200ms。
充电状态
低电状态：红灯每 2s 亮 100ms。
充电未完成：红灯亮 1s 灭 1s。
充电完成：红灯常亮。
1. 长按按键 3S，设备开机
4. 进入管理界面
5.STA Setting 需要做以下设置
6. 选择                    保存后不重启，继续设置  
7.Network 网络设置
2. 使用手机或 PC 的无线网卡连接“USR-WIFI232-G2”（初始网络无密码）。
3. 打开浏览器，在地址栏输入 http://10.10.100.254，回车。在弹出来的对
    话框中填入用户名和密码，均为 admin，然后确定。
http://10.10.100.254
admin
admin
记住我的密码
确定
取消
密码
账号
http://10.10.100.254
Scan Router
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Scan
Save
Mode Selecting
Network Name(SSID)
case sensitive
Encryption Method
Encryption Algorithm
Password
Obtain an IP address automatic ally
IP Address
Subnet Mask
Gateway Address
DNS Server Address
AP+STA
WPA2PSK
Scan
Save
AES
Enable
0.0..0
0.0..0
0.0..0
0.0..0
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
SOCKET_A Setting
Protocol
Port ID
Server Address
TCP Time Out Setting
SOCKET_B Setting
Enable/Disable
Protocol
Port ID
Server Address
TCP Time out Setting
UDP-Client
120.25.60.182
9123
Save
300
Disable
TCP-Client
300
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Mode Selecting: 选择 AP+STA
Encryption Method: 选择加密方法
Encryplicn Ajgorithm: 选择加密演算法
Password: 输入 WIFI 密码
SOCKET_A Setting Protocol: 协议设置 , 设置为：UDP-Client。
Port ID：端口设置 ,(Sportslink 的服务器端口为 9123)
Server Address: 服务器 IP 地址 ,(Soprtslink 的服务器 IP 地址为：120.25.60.182)
Save: 点           保存
Save: 点           保存
Network Name(SSID): 点             搜索选择所要使用的 WIFI 网络，或手动
                                        输入 WIFI 名称。
Saved Successfully!
Configurations will take effect after restare.
After restart, you will need to re-login the configuration
interface for other settings, soit is rec ommended to restart
after completing all settings.
Please click (Restart) to restart now, or click (Back) to
continue setting.
You can restart after all configuration.
Restart
Back
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Saved Successfully!
Configurations will take effect after restare.
After restart, you will need to re-login the configuration
interface for other settings, soit is rec ommended to restart
after completing all settings.
Please click (Restart) to restart now, or click (Back) to
continue setting.
You can restart after all configuration.
Restart
Back
Back
Save
8. 选择 Restart
型号： RC900                           主要功能： 收集运动数据
数据收集协议： ANT+               ANT+ 传输距离： 10 米
电池容量： 1200mAh               电池寿命： 可连续使用 15 小时
数据传输： WIFI                        WIFI 距离： 30 米
数据上传： UDP                       支持设备： 支持 ANT+ 的运动设备
●本手册所载资料仅供参考。所述产品可能会因为生产商的持续研发计划而有所变动，
毋需事先做出通告。
● 本公司一概不就本手册或其所述产品作出任何声明与保证。
● 本公司一概不对使用本手册与其所述产品所产生的或与其相关的直接或间接、意外或
特殊的损害、损失与费用承担任何法律责任。
保存重启
1
2
3
4
5
6
7
8
9
10
11
Data Collector / RC900   Version: 2016-4-25
User Manual
Parts
Buttons and Lights
Setup
Main Module
USB Charger
(Optional)
USB Cable
User Manual
Technical Specifications
Disclaimer
User Manual
Button
Blue LED
Red LED
Buttons Operation
1. Press and hold the button for 3 seconds to turn on/off 
the collector. The blue LED will light up for 2 seconds.
2. When off, press and hold the button for 10 seconds to 
clear the network information. The blue LED will flash, 
light up for 100ms and off for 100ms.
LED Status 
Network Status
Network connected: The blue LED will flash, light up for 400ms and off 
for 400ms.
Network not connected: The blue LED will light up for 200ms in every 
2 seconds.
Charging status:
Low battery: The red LED will light up for 100ms in every 2 seconds.
Charging incomplete: The red LED will light up for 1 second and off for 
1 second.
Charging complete: The red LED will stay light up.
1.Press and hold the button for 3 seconds to turn on the data collector.
2.Use the wireless connection through cellphone or PC to connect network 
“USR-WIFI232-G2” . By default this network has no password.
3.Open your browser, and enter http://10.10.100.254. In the pop-up 
window enter the user name and password (both “admin” ), then confirm.
4. Entering the set-up menu
5.STA Setting needs to follow the following procedure
6. Select                           to save without restart and continue setting
7.Network Setup
http://10.10.100.254
admin
admin
Save Password
Confirm
Cancel
Password
Account
http://10.10.100.254
Scan Router
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Scan
Save
Mode Selecting
Network Name(SSID)
case sensitive
Encryption Method
Encryption Algorithm
Password
Obtain an IP address automatic ally
IP Address
Subnet Mask
Gateway Address
DNS Server Address
AP+STA
WPA2PSK
Scan
Save
AES
Enable
0.0..0
0.0..0
0.0..0
0.0..0
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
SOCKET_A Setting
Protocol
Port ID
Server Address
TCP Time Out Setting
SOCKET_B Setting
Enable/Disable
Protocol
Port ID
Server Address
TCP Time out Setting
UDP-Client
120.25.60.182
9123
Save
300
Disable
TCP-Client
300
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Mode Selecting: Select AP+STA
Network Name(SSID): Click                 to search the WIFI network you want to use, 
or manually enter the WIFI name.
Encryption Method: Selecting encryption method.
Encryption Algorithm: Selecting encryption algorithm.
Password: Entering WIFI password
Save: Click               to save.
SOCKET_A Setting Protocol: Set up the protocol. 
The setting should be: UDP-Client.
Port ID: To setup port ID. ( The server port of Sportslink should be 9123)
Server Address: Server IP address. (Soprtslink server IP address is 120.25.60.182)
Save: Click                to save.
Saved Successfully!
Configurations will take effect after restare.
After restart, you will need to re-login the configuration
interface for other settings, soit is rec ommended to restart
after completing all settings.
Please click (Restart) to restart now, or click (Back) to
continue setting.
You can restart after all configuration.
Restart
Back
Fast Setting
System
STA Setting
AP Setting
Network
UART Setting
Account
Upgrade SW
Restart
Restore
Saved Successfully!
Configurations will take effect after restare.
After restart, you will need to re-login the configuration
interface for other settings, soit is rec ommended to restart
after completing all settings.
Please click (Restart) to restart now, or click (Back) to
continue setting.
You can restart after all configuration.
Restart
Back
Back
Save
8. Select                          to save and restart
Restart
Model: RC900 
 
Main function: Collect sports data
Data collection protocol: ANT+               ANT+ transmission distance: 10 meters
Battery capacity: 1200mAh             Battery life: continues operation time is 15 hours
Data transmission: WIFI                       WIFI distance: 30 meters
Data upload: UDP                      Compatibility: Supports ANT+ sports equipment
●The product it describes are subject to change without prior notice, due to the 
manufacturer's continuous development program.
●Our company makes no representations or warranties with respect to this manual or with 
respect to the products described herein.
●Our company shall not be liable for any damages, losses, costs or expenses, direct, indirect 
or incidental, consequential or special, arising out of, or related to the use of this material or 
the products described herein.
1
2
3
4
5
6
7
8
9
10
11