BST TECHNOLOGY CO. LTD FQ02 ユーザーズマニュアル

 

 

4

Press OK key to confirm and enter main menu. Under standby mode, long press OK key 

to open/close the torch. 

Dial numbers under standby mode and enter numbers and characters in editing mode.   

Under standby mode, press and hold this key to switch between current profile and silent 

profile. Under players and FM mode, press # key to increase volume.   

 

 

1> Insert the SIM cards (switch off the phone at first). For detailed installation guide, please refer to “Installing 

the SIM card”.   

2> Charge the battery. Refer to “Battery and charging”.   

3> Press and hold the End key to switch on the mobile phone.   

4> If the display prompts, enter the four-digit password and press “OK “key.   

5> If the display prompts, enter the PIN code (provided together with the SIM card) and press” OK” key.   

6> Enter area code and telephone number and then press the Call key/left soft key to dial out by SIM1/ SIM2 .   

Note: Before using the mobile phone, please insert valid SIM cards and charge the battery.   

When you register mobile phone, you can apply for two different telephone numbers and two SIM cards 

(Subscriber Identity Module). With the two cards, you can use the functions of the mobile phone. The SIM card 

saves the parameters required by the communication, and personal information, including PIN code (personal 

identity number), contacts, short messages and other system services.   

Since the mobile phone doesn’t have enough space, you may need to install a memory card (T-FLASH card).   

To install the T-FLASH card: open the rear cover, take out the battery, insert the T-FLASH card into the slot, 

install the battery and then turn on the mobile phone. To remove the T-FLASH card: open the buckle and take 

out the T-FLASH card, and then lock the buckle.

 

Warning: Do not bend or scratch the SIM card, or contact static, dust or water; if the SIM card is lost, please 

contact your network operator. Please switch off the mobile phone before installing the SIM card. The SIM card 

is inserted into the rear side of the mobile phone.   

Note: The T-flash card is tiny. Please keep it away from children to avoid swallowed. If the SIM card is invalid 

or damaged, the phone displays “Insert SIM card”. Switch off the phone and take out the SIM card, and then 

re-insert it into the slot properly. If the SIM card is damaged, please contact your network operator. If the SIM 

card is locked, please contact your network operator.