RF Engineering & Energy Resource LLC KI-GSM904 ユーザーズマニュアル
4
About the main panel
The main panel should be installed in the center of prevent place which could receive the
signal very well from all wireless sensors. Please attention to keep the main panel away
from metallic objects, steel-reinforced concrete, fireproof door, home appliance or any
electricity device with high frequency interference
signal very well from all wireless sensors. Please attention to keep the main panel away
from metallic objects, steel-reinforced concrete, fireproof door, home appliance or any
electricity device with high frequency interference
1.Front instruction
Power: It will be on after you connect AC power or switch on back up battery
Arming : It will be on if the system is away armed
Home : It will be on if the system is home armed
GSM: Disconnected GSM network with quick flashing.1 time each second
Arming : It will be on if the system is away armed
Home : It will be on if the system is home armed
GSM: Disconnected GSM network with quick flashing.1 time each second
Connected GSM network with slow flashing, 1 time every 3 seconds
SET: It will be on under the status of programming
ALARM: it will be on when the system is alarming
ALARM: it will be on when the system is alarming
It will flash when the system is armed
2.Back instruction