Ulterius Technologies LLC FDN40 ユーザーズマニュアル
CHAPTER 12: WI-FI
Configuration User Manual
238
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
UltOs# show apradio radio0 ssid summary
12.3.4.2 WEB Configuration
VAP can be deleted through WEB interface using the AP Radio Setings
screen (Navigation - Home-> Access Point-> Radio Settings)
screen (Navigation - Home-> Access Point-> Radio Settings)
Screen 12-6: AP RadioSettings - Deleting VAP (SSID)
12.3.5 Rate-limit Configurations
12.3.5.1 CLI Configurations
1. Execute the following commands to configure Rate-limiting
configurations on the target.
Enter the Global Configuration Mode.
UltOs# configure terminal
Specify the radio interface.
UltOs(config)# apradio radio1
Rate-limit configurations can be applied for interface or for the
desired Station.Rate-limit for the interface can be done as :
desired Station.Rate-limit for the interface can be done as :
UltOs(config-apradio1)# rate-limit interface Cir 1 Cbs 1 Eir 5000
Ebs 8000000 Coupling-Flag enable
Ebs 8000000 Coupling-Flag enable
Exit the configuration Mode.
UltOs(config-apradio1)# end
2. View the Rate-limit configurations for the interface.
UltOs# show apradio radio1 interfacerate-limit
CIR EIR CBS EBS
C-Flag RowStatus
C-Flag RowStatus
--- --- --- ---
------ ---------
------ ---------
1 5000 1 8000000
Enabled Active
Enabled Active
3. Rate-limit configurations can be disabled in the WiFi configuration mode.
UltOs(config-apradio1)# no rate-limit interface
4. Execute the show command to ensure if the Rate-limit configurations are
deleted.