Ulterius Technologies LLC FDN40 ユーザーズマニュアル
CHAPTER 2: SYSTEM FEATURES
Configuration User Manual
28
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
2.2 System Features / Configurations
2.2.1
Configuring the Default IP Address
Configuring the Default IP Address will result in the IP address to be written
to the NVRAM and this will be used as the IP address of the default interface
when the switch is restarted. This will update the IP address of the Inband
Management VLAN.
to the NVRAM and this will be used as the IP address of the default interface
when the switch is restarted. This will update the IP address of the Inband
Management VLAN.
2.2.1.1
CLI Configuration
1. Execute the following commands to configure the Default IP Address.
Enter the Global Configuration mode.
UltOs# configure terminal
Configure the default IP address and subnet mask as 10.10.10.1 and
255.255.0.0, respectively.
255.255.0.0, respectively.
UltOs(config)# default ip 10.10.10.1 subnet-mask 255.255.0.0
Exit from the Global Configuration mode.
UltOs(config)#end
2. View the default IP address and subnet mask by executing the following
command.
UltOs# show nvram
Default IP Address : 10.10.10.1
Default Subnet Mask : 255.255.255.0
OOB IP Address : 172.30.19.108
OOB Subnet Mask : 255.255.255.0
Default IP Address Config Mode : Manual
Default IP Address Allocation Protocol : DHCP
Switch Base MAC Address : 54:df:00:00:08:01
Default Interface Name : wan0/1
Default RM Interface Name : NONE
Config Restore Option : Restore
Config Save Option : Startup save
Auto Save : Disable
Incremental Save : Disable
Roll Back : Enable
Config Save IP Address : 0.0.0.0
Config Save Filename : zeus.conf
Config Restore Filename : zeus.conf
PIM Mode : Sparse Mode
IGS Forwarding Mode : MAC based