Vubiq Networks Inc. V10G-L ユーザーズマニュアル
61
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
auto-atten (Rx auto-atten setting/status)
The auto-atten setting is a switch that enables firmware auto attenuation when it is a 1 and disables firmware auto
attenuation when it is a 0. The seek-status informs the user as to whether the auto attenuation has settled on a
value or is looking for a working value.
attenuation when it is a 0. The seek-status informs the user as to whether the auto attenuation has settled on a
value or is looking for a working value.
CLI example:
# rf rx auto-atten mode 1
# rf rx auto-atten mode
1
# rf rx auto-atten seek-status
seeking
#
# rf rx auto-atten mode
1
# rf rx auto-atten seek-status
seeking
#
Web GUI:
MIB: vubiqRfRxAutoAttenMode
OID: .1.3.6.1.4.1.46330.2.2.1.12.0 (Integer)
bb atten (Rx BB atten setting)
The bb atten setting allows the user to read and write the BB attenuation setting. It can have a value of 1 or 2.
CLI example:
# rf rx bb atten ?
<1-2> Atten select. One of { 1 | 2 }
# rf rx bb atten 1
0
# rf rx bb atten 2
0
#
<1-2> Atten select. One of { 1 | 2 }
# rf rx bb atten 1
0
# rf rx bb atten 2
0
#
Web GUI example:
MIB: vubiqRfRxBbAtten1
OID: .1.3.6.1.4.1.46330.2.2.1.10.0 (Integer)
MIB: vubiqRfRxBbAtten2
OID: .1.3.6.1.4.1.46330.2.2.1.11.0 (Integer)
dssi (Rx DSSI status)
DSSI or Digital Signal Strength Indication is an overall goodness measurement of the quality of the digital data
being received across the radio link. The DSSI is nominally 100 but occasional blips below 90 are not necessarily
being received across the radio link. The DSSI is nominally 100 but occasional blips below 90 are not necessarily