Zeeva International Limited EP-0601 ユーザーズマニュアル

3. Activate the Bluetooth function on your phone within range and select 

 “BT BLAZE BUD” from the list shown.
4. The LED indicator lights in blue when paired successfully.

Attention: If the pairing is not successful within 5 minutes, the headset will 

power off, please repeat the pairing procedures to try again. 

1. Keep the distance between your wireless headset and mobile phone 

  (or other devices) within 32.8 Feet.
2. Power on the BLAZE Wireless Headset

When powered on, the headset will automatically connect with the last 

successfully paired device.

Leave the headset 60ft away from your mobile phone or further.

Power off the headset; or

Switch off the Bluetooth on your mobile phone; or

When you receive a call, press the On/Off Button once to accept the call,

or answer the call normally via your mobile phone.
Long press On/Off Button to reject a call

Press the On/Off Button once to end the call or hang up your mobile phone.

FCC ID: 2ADM5-EP-0601

Made Exclusively for Five Below

Distributed by Zeeva International Limited

Suite 1006C-8, 10th Floor, Exchange Tower, 

33 Wang Chiu Road, Kowloon Bay,

Hong Kong, China
Keep all relevant information for future reference

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that 

may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the 

   receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. 

The device can be used in portable exposure condition without restriction.

LED indicator light turns red when charging your headset
LED indicator light turns off when your headset are fully charged

Short press    Button to advance to next song

Long press    Button to turn up volume
Long press    Button to turn down volume

Short press    Button to go back to previous song

USB Plug

Micro USB Plug

Press and hold down the On/Off Button for 2 seconds 

and the LED indicator will flash in red and blue alternately.

Press and hold down the On/Off Button for 2 seconds 

and the LED indicator will turn off.

Press and hold the LED Light On/Off Button for 1 second to switch On

the LED flash.

Press and hold the LED Light On/Off Button for 1 second to switch Off

the LED flash.

please try the following:
Ensure that your headset are in pairing mode or reconnection mode.

Ensure that Bluetooth search function of your mobile device is activated.

If the BLAZE Wireless Headset will not turn on:
Make sure the headset are fully charged.

Can I change the battery for the headset?
BLAZE Wireless Headset use a built-in non-detachable battery which

cannot be removed.

If the BLAZE Wireless Headset cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely 

and the outlet works. If you use a computer, ensure that it is connected and 

the USB port is powered.

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please 

only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F 

and 40 deg °C/104 deg °F.

-Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw 

into fire.

-Switch off the product after use.

-Please note that we won’t take any responsibility for any wrong operation 

(e.g. Voltage higher than 5V) as this may result in severe injury or loss of 

property, and we cannot control the operating process during the time the user 

using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to 

explosion, heat generation, fire development or smoke development.

Safety instructions for the lithium battery and charging the product

Thank you for purchasing the BLAZE Wireless Headset.

This manual provides more information about the wireless headset, 

please read the instructions before using. 

BLAZE Wireless Headset x 1 pc

Micro USB Charging Cable x 1 pc

User Manual x 1

BLAZE

W i r e l e s s   H e a d s e t

Impedance: 32 Ohms 

Sensitivity: 95 dB +/- 3 dB

Frequency Response: 20 Hz - 20 KHz

Power Supply: Li-ion Battery 3.7V 55 mAh  

Playing Time: 1-2 Hours

Charging Time: 1-2 Hours

Bluetooth Range: 32.8 Feet

Micro USB cable included.

LIGHT TUBE

Vol-/

Previous Song

On/Off Button

Play/Pause Music

Answer/End Call

Vol+/

Next Song

Microphone
LED indicator

LED Light

On/Off Button
Micro USB 

Charging Port

1

4

5

2

3

6

1

4

5

2

3

6