Zeeva International Limited SP0167 ユーザーズマニュアル

iPod

®

, iPhone

®

 and iPad

®

 are trademarks 

of Apple Inc. registered in the U.S. and other 

countries. Android

™ is trademarks of Google, Inc.

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) This 

device must accept any interference received, 

including interference that may cause undesired operation.

Warning:  Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void 

the user’s authority to operate the equipment.

NOTE:  This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules.  These limits are designed to provide reasonable 

protection against harmful interference in a residential installation.  

This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications.

However, there is no guarantee that interference will not occur in a 

particular installation.  If this equipment does cause harmful 

interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the 

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

“FCC RF Radiation Exposure Statement Caution: 

To maintain compliance with the FCC’s RF exposure guidelines, 

place the product at least 20cm from nearby persons.”

FCC ID: 2ADM5-SP0167

  

Introduction
Package Contents        
Connection Diagram
How to use
4.1  General function
4.2  Pairing to mobile phone
4.3  Charging your speaker
Product Specifications
FAQ
FCC Statement

1
2
2
3
3
4
5
6
6
7

1
2
3
4

5
6
7

Congratulations, and thank you for
choosing the Bluetooth Giant Speaker.
This manual will help you operate
the Bluetooth Giant Speaker, but you 
should first familiarize yourself with the
Bluetooth functionality of your mobile
phone or other devices before using
the Bluetooth Giant Speaker.

1 Please follow the rules depicted in this

manual closely to ensure your safety.

Before using this Bluetooth speaker, we

would strongly encourage you to read

through this user manual.

2 Be wary of any edges, uneven

surfaces, metal parts, accessories and

its packaging to prevent any possible

injury or damage.
Do not modify, repair or dismantle this

speaker. Doing so may result

in fire, electric shock, complete

breakdown of this Bluetooth speaker,

etc. All of which are not covered under

warranty.

3

Do not use any diluent or volatile liquid

to clean the Bluetooth speaker.

4

Do not use the Bluetooth speaker in a

hazardous location.

5

1

2

3

To use your Bluetooth speaker, you must
first pair your speaker with a phone or a 
computer. Once your Bluetooth speaker
is paired to a specific mobile device, they
will remain paired and automatically
recognize each other whenever they are
within range.

Ans: Ensure the battery has been charged 
up to 6 hours for initial use.

Ans: Check the connection between the 
speaker and the phone or computer, if the 
connection is not established,please connect 
again.Make sure the speaker is paired with 
your Bluetooth enabled device.

You can play music, watch TV shows/movies, 

and play games with your device, with all of 

the sound coming from the speaker.

Turn on your phone and ensure the Bluetooth

function is activated.
Turn on the speaker, enter the pairing mode.
Search the Bluetooth devices on your phone

by following the phone’s instructions. Refer

to your phone’s user manual for more 

information.

After a few seconds the phone will list the 

“SP-0167-Giant Speaker” as a discover device. 

Select it and follow your phone’s instructions 

to select this pairing.

Use the Micro USB cable provided with
this speaker. Connect the Micro USB
plug to the Micro USB charging port on
the speaker positioned at      in speaker
diagram on page 2. Connect the USB
plug to a USB port on a computer or
wall adapter to activate charging.

2

USB Plug

Micro USB Plug

1X Bluetooth Giant Speaker

1X Micro USB Cable

1X User Manual

1X Aux-in Cable

1. On/Off Switch
2. Micro USB Charging Port
3. LED Indicator
4. Aux-in Port

Front

Back

4

3 2

1

DC5V

AUDIO-IN

OFF/ON

Slide the          button to the right.  

Use a Bluetooth enabled mobile 
phone or other Bluetooth enabled 
device to perform necessary 
pairing action. 

Slide the          button to the left.  

Plug the Micro USB end to the 

       port for charging device.

Aux-in Mode

Plug the Aux-in cable to the audio

port, then plug the other end to 

your music device.

Turn on &

Enter the

pairing mode

Pairing

Turn off

Charging

Bluetooth Version

Bluetooth Range

Driver Diameter

Output Power

Voltage

Impedance

Battery Capacity

Working Hours

Charging Hours

Charge Type

2.1
≤ 32 Feet
76 mm
5 W
3.7 V
4 Ohms
900mAh Li-ion Battery
5-6 Hours
3-4 Hours
Micro USB Cable (Included)