Zeeva International Limited VZ60030BT ユーザーズマニュアル

ページ / 1
Instruction Manual
ITEM #: VZ60030BT
Introduction
A Quick Look at Your Device
FCC Statement
Important Safety Precautions
Vivitar One Year Warranty
Vivitar One Year Warranty (cont.)
Package Contents
Specifications
Instruction
Manual
with
Warranty Info.
VZ60030BT
Bluetooth
Speaker
Charging Your Speaker
Pairing Your Speaker
Using Your Speaker
Powering Your Speaker On and OFF
1. Press and hold the ON/OFF button in order to power on 
your speaker. If you have already paired your speaker to 
your Bluetooth device, they will automatically remain paired 
each time you power on your speaker.
2. Press and hold the ON/OFF button in order to power off 
your speaker.
Listening to Music
• Play/Pause Button: Press to play or pause a track.
• Quickly tap the “NEXT TRACK/VOLUME +” button to 
advance to the next song in a playlist..
• Quickly tap the “PREVIOUS TRACK/VOLUME -” button to 
go back to the previous song in a playlist.
• Press and hold the “NEXT TRACK/VOLUME +” button to 
increase the volume
• Press and hold the “PREVIOUS TRACK/VOLUME -” 
button to decrease the volume.
Note: You can also adjust volume and playback settings on 
your phone or connected audio device.  When listening to 
music from a device that is connected to the speaker’s 
Auxiliary Port, the buttons on the speaker may not function 
to advance to the next track or return to the previous track.  
Using the Phone Function 
• Answering a Call: Quickly press the ANSWER button to 
answer an incoming call.
• Reject an Incoming Call: Press and hold the ANSWER 
button to reject an incoming call.
• Ending a Call: Quickly press the ANSWER button to end a 
call.
Note: The phone function can only be used when there is a 
Bluetooth connection between your speaker and phone.
Your speaker has a built-in, rechargeable lithium-ion 
battery. To avoid damage, do not attempt to remove the 
battery. The full performance of the battery is only achieved 
after a few charging-discharging cycles. Charge the battery 
fully before first use. To do so, follow the steps below:
1. Connect one end of the included Micro USB charging 
cable to the Micro USB charging port on your speaker. Then 
plug the other end of the Micro USB charging cable into a 
USB port on your computer or a suitable power adapter in 
order to recharge the internal rechargeable battery.
NOTE: The internal battery of your speaker takes 
approximately two hours to charge when completely 
drained. To maximize performance, it is recommended to 
charge the battery for six hours before initial use.
2. When the battery is charging, the LED indicator light will 
turn red. The LED indicator light will turn blue when the 
battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery. A 
charged battery will lose its capacity if it is not used on a 
regular basis.
Important!
To avoid a complete discharge of the battery, charge your 
speaker at least once every six months.
  Maintenance and Care
This device complies with the part 15 of the FCC rules. Operation is 
subject to the following two conditions:(1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate the 
equipment.
NOTE: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with instructions may cause harmful 
interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is encouraged 
to try to correct the interference by one or more of the following 
measures:
__ Reorient or relocate the receiving antenna.
__ Increase the separation between the equipment and receiver.
__ Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
__ Consult the dealer or experienced radio/ TV technician for help.
This warranty covers the original consumer purchaser only 
and is not transferable.
This warranty covers products that fail to function properly 
UNDER NORMAL USAGE, due to defects in material or 
workmanship. Your product will be repaired or replaced at 
no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in 
material or workmanship and damages or malfunctions from 
other than normal use, including but limited to, repair by 
unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting 
Information:
Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the 
UK or visit our website at www.vivitar.com.
To receive Warranty service along with the name and 
address of an authorized product service center, the original 
consumer purchaser must contact us for problem 
determination and service procedures. Proof of purchase in 
the form of a bill of sale or receipted invoice, evidencing that 
the product is within the applicable Warranty period(s), 
MUST be presented in order to obtain the requested 
service. It is your responsibility to properly package and 
send any defective products along with a dated copy of 
proof of purchase, a written explanation of the problem, and 
a valid return address to the authorized service center at 
your expense. Do not include any other items or accessories 
with the defective product. Any products received by the 
authorized service center that are not covered by warranty 
will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE, OTHER THAN THOSE 
EXPRESSLY DESCRIBED ABOVE SHALL APPLY. 
DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES 
AFTER THE EXPRESS WARRANTY PERIOD STATED 
ABOVE. NO OTHER EXPRESS WARRANTY OR 
GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY 
WITH RESPECT TO THE PRODUCT SHALL BE BINDING 
ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR 
REFUND OF THE ORIGINAL PURCHASE PRICE - AT 
DISTRIBUTOR’S SOLE DISCRETION -ARE THE 
EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO 
EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR 
SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, 
INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL 
DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES 
FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR 
RECORDS) CAUSED BY THE USE, MISUSE OR 
INABILITY TO USE THE PRODUCT. EXCEPT AS STATED 
HEREIN, NO OTHER WARRANTIES SHALL APPLY. 
NOTWITHSTANDING THE FOREGOING, CONSUMER’S 
RECOVERY AGAINST DISTRIBUTOR SHALL NOT 
EXCEED THE PURCHASE PRICE OF THE PRODUCT 
SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT 
EXTEND TO ANYONE OTHER THAN THE ORIGINAL 
CONSUMER WHO PURCHASED THE PRODUCT AND IS 
NOT TRANSFERABLE.
This product is manufactured, distributed and sold by 
SAKAR International, Inc. All other trademarks are the 
property of the respective owner, who has not sponsored, 
endorsed or approved this product.
BLUETOOTH SPEAKER
When using your Vivitar Bluetooth Speaker, basic safety 
precautions should always be followed, including the 
following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR 
SPEAKER.
2. Do not use your speaker near water. Clean using a soft 
cloth or paper towel.
3. Do not place your speaker on any wet surfaces.
4. Do not allow children or the infirm to play with your speaker 
without adult supervision.
5. Do not expose your speaker to excessive heat, flames or 
fire.
6. Always press all buttons carefully. Do not manhandle your 
speaker.
7. Do not use in extremely dry environments, as this can lead 
to static discharge during usage.
8. Do not expose your speaker to temperatures above 40°C. 
Keep out of direct sunlight.
9. Do not attempt to repair this product yourself. Contact a 
qualified service center if your speaker is in need of service.
10. Do not drop, puncture or expose your speaker to 
excessive trauma.
11. Your speaker is not intended for commercial use.
12. Do not place near objects that generate a strong magnetic 
field.
13. Use only the supplied chargers and cables. Unplug this 
device when not in use for long periods of time or during 
lightning storms.
Bluetooth Version: 4.1
Bluetooth Range: Up to 32.8 feet (10 meters)
Power Supply: DC 5V
Battery Type: 1,200 mAh, 3.7V, Lithium-Ion Battery
Charge Time: Approximately 2 Hours
Driver Diameter: 66mm
Impedance: 4 Ohms
Next Track/
Volume +
Microphone
Previous Track/
Volume -
On/Off
Play/Pause
Answer
Top
Back
Front
Side
LED Indicator Light
Auxiliary Port
Micro USB
Charging Port
Your speaker can be paired with most Bluetooth devices 
including iPads, iPhones, iPod Touches, and most 
smartphones, laptops and tablets. In order to pair your 
speaker with a phone, follow the steps below:
1. Press and hold the ON/OFF button until your speaker 
powers on. The LED indicator light on your speaker will 
alternately flash blue and red, blinking rapidly. This 
indicates that your speaker is in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select “VZ60030 WL 
Speaker” to start connecting.
4. Enter “0000” if your device asks for the PIN code.
5. Once paired, the LED indicator light will slowly blink blue 
every few seconds.
Note: If the speaker does not automatically enter into 
Bluetooth mode, press the Mode/Pair button to initiate 
pairing.
Micro USB 
Charging 
Cable
3.5mm
Aux
Cable
Thank you for purchasing your Vivitar Bluetooth Speaker, 
item VZ60030BT. You can use your speaker with iPads, 
iPhones, iPods and many other types of smartphones and 
Bluetooth devices to stream music and enjoy hands-free 
calling. In order to get the best results when using this 
device, please read this manual first before using.
-Before using your speaker, inspect the ports and jacks to 
make sure that they are clear of dust and debris before 
charging or inserting an AUX cable. 
-Use a soft cloth to clean your speaker.  Never use any 
harsh chemicals or detergents. Make sure your speaker is 
dry before using.
-When your speaker is not in use, it should be stored in a 
cool, dry place.
-Never tug or yank on the USB cable or AUX cable while 
they are connected to your speaker.  Connect and 
disconnect these cables as carefully as possible.
-Never expose your speaker to high temperatures, 
extreme cold, high humidity or excessive moisture or 
water. 
-Please recycle or dispose of your speaker properly based 
on the laws and rules of your municipality. Contact local 
recycling facilities and/or the manufacturer of your speaker 
for further information.
50mm
86mm
FCC ID: 2ADM5-VZ60030BT