IP TRADE SA IPT-WPTTH ユーザーズマニュアル

ページ / 8
 
WPTT USER MANUAL 
 
All rigths reserved to 
IP Trade SA 
1.
 
Signal transmission status 
 
Transmission LED of the WPTT Handheld Device indicates signal transmission 
status: 
 
Button 
pressed 
LED State 
Description 
Yes 
Steady red 
WPTT Handheld Device successfully sends 
applicative messages to the WPTT Base Device 
Yes 
100ms orange/red 
blink 
WPTT Handheld Device has failed to send an 
applicative message to the WPTT Base Device 
No 
100ms orange 
blink every 3s 
No pairing information available, WPTT device 
should be paired 
2.
 
Charging WPTT Handheld Device 
 
WPTT Handheld Device is powered through an embedded battery. 
The battery has 18 hours autonomy and can be charged within 2 hours. 
  
IP Trade recommends charging the WPTT Handheld Device battery using provided 
USB cable. 
Note:  when charging the clip on “WPTT Handheld Device” on a turret with the 
“USB” base connected, the 2 units will pair. 
  
Power LED of the WPTT Handheld Device indicates battery charge status: 
  
USB 
connected 
LED State 
Description 
No 
100ms green blink every 3s 
The battery has a good level 
No 
100ms orange blink every 3s 
The battery level is down, it should be 
recharged 
Yes 
500ms green blink every 1s 
The battery is charging 
Yes 
Steady green 
The battery is fully charged