Smartbow GmbH W010 ユーザーズマニュアル
Page 20 of 34
5
Installation
5.1 Installation of the SMARTBOW Wallpoint
The Wallpoint has to be installed only by MKWE technicians or authorized partners. In order to
do this a Cat5e cable (specification see Appendix A), without connectors, is required at the
position where the SMARTBOW Wallpoint will be installed. Refer to the cabling plan provided by
MKWE or authorized partners for the positions where the SMARTBOW Wallpoints will be
installed. The cable will be terminated and tested by the technician. It is not possible to relocate
the SMARTBOW Wallpoint after installation; this can lead to undesired and unstable system
behaviour.
5.2 Mounting the SMARTBOW Wallpoint
Necessary tools for installation:
•
1 pcs. cordless drill driver
•
1 pcs.TX25 bit
•
1 pcs. screwdriver TX10 (if possible with torque limitation M
max
=0,6Nm)
•
1 pcs. knife
•
1 pcs. pencil
Optional tools for installation (depends on material of wall)
•
1 pcs. impact drilling machine
•
1 pcs. 8mm impact drill
Step 1: Use mounting bracket to mark drill pattern
Figure 6: Marking the drill pattern
Step 2: Drill holes for dowels (skip this if you mount the SMARTBOW Wallpoint on wood)