Presidio Networked Solutions Inc. AIO3 ユーザーズマニュアル
4
This document contains information and data which is proprietary to Presidio that shall not be duplicated, used, or disclosed - in whole or in part
- for any purpose other than to evaluate this product.
AIO3.0 User’s Manual
PRES058-150422 REV 4
1.0
I
NTRODUCTION
This Operator’s Manual is designed to provide instructions for the operation of the Presidio
Advanced Generation Tracker 3.0 (AIO3.0). The AIO3.0 is sold exclusively in the United States
and is FCC compliant and carrier approved.
Advanced Generation Tracker 3.0 (AIO3.0). The AIO3.0 is sold exclusively in the United States
and is FCC compliant and carrier approved.
In addition, this manual describes how to install and operate the device. The devices are
manufactured by Presidio, located at 5337 Millenia Lakes Blvd, Suite 300; Orlando, FL 32839.
manufactured by Presidio, located at 5337 Millenia Lakes Blvd, Suite 300; Orlando, FL 32839.
FCC Compliance:
This device complies with part 15 of the FCC rules. Operation of this device is subject to the
following two conditions:
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
undesired operation.
FCC RF Exposure Information:
Warning: The antenna supplied with this device must be used for installation and operation. The
manufacturer must approve substitution of other antennas for compliance to radiation safety limits,
where the antenna gain should not exceed 1.8 dBi for < 1GHz and 1.5 dBi for > 1 GHz.. The
mounting of this device and antenna must be installed to ensure that the user or nearby persons will
maintain at separation of 20 cm from the antenna in normal use.
manufacturer must approve substitution of other antennas for compliance to radiation safety limits,
where the antenna gain should not exceed 1.8 dBi for < 1GHz and 1.5 dBi for > 1 GHz.. The
mounting of this device and antenna must be installed to ensure that the user or nearby persons will
maintain at separation of 20 cm from the antenna in normal use.
Warning
:
All persons must maintain a minimum separation of 20 cm from modem antenna when the transmitter is
operating to meet FCC RF exposure compliance.