Guangde Ledup Enterprise Inc. ITR51701B1WC ユーザーズマニュアル

                                                    

LED17

                      

When using electric products, basic precautions should always be followed including the following:

a) 

b)  Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. 

  When products are used in outdoor applications; connect the product to a Ground Fault Circuit 

  Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

c)  This seasonal use product is not intended for permanent installation or use.

d)  Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

e)  Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

f)  Do not let LEDs rest on the supply cord or on any wire.

g)  Unplug the product when leaving the house, when retiring for the night, or if left unattended.

h)  This is an electric product―not a toy! To avoid risk of fire, burns, personal injury and electric shock, it 

  should not be played with or placed where small children can reach it.

i)  Do not use this product for other than its intended use. 

j)  Do not hang ornaments or other objects from cord, wire, or light string.

k)  Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on. 

l)  Do not perform any maintenance or troubleshoot for bad or broken LEDs while the power is on.

m) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

n)  Do not cover the product with cloth, paper or any material not part of the product when in use.

o)  This product is equipped with push-in type LEDs. Do not twist LEDs.

p)  To reduce the risk of fire and electric shock: a) Do not install on trees having needles, leaves or 

  branch coverings of metal or materials which look like metal, and b) Do not mount or support strings 

  in a manner that can cut or damage wire insulation.

q)  Read and follow all instructions that are on the product or provided with the product.

r) 

a)  When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place 

  on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.

b)  If the product is placed on a tree, the tree should be well secured and stable.

c)  Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed 

  wire insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.

d)  When storing the product, carefully remove the product from wherever it is placed, including tree branches, 

  or bushes to avoid any undue strain or stress on the product conductors, connections, and wires.

e)  When not in use, store neatly in a cool, dry location protected from sunlight.

f)  LEDs which become loose or burned out must be replaced promptly in order to maintain the 

     performance and life expectancy of this set.

FOR INDOOR AND OUTDOOR USE

Do not replace or modify any connectors on this product. Discard product if connector is damaged. Make sure connectors are fully 

inserted and any connector rings are twisted until completely secured such that the ring can no longer be turned and the two 

portions of the connector are completely assembled.

1. To reduce the risk of overheating, replace burned-out LEDs promptly. Use only 5 volt, 60 mA LED type lamps provided with this product.

2. DO NOT USE ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING 

THIS MAY RESULT IN DAMAGE TO YOUR LIGHT STRING OR CAUSE PERSONAL INJURY. THIS ACTION WILL RESULT IN A VOID OF THE 

LIMITED WARRANTY OF THIS PRODUCT. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.  

Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

1. Carefully remove the remote from the packaging.

2. Remove the slide plate located on the back of the remote control.

3. Insert a standard 9 volt type battery (6F22, 6LR61 or 23F6-220) by aligning the appropriate (+/-) 

    markings accordingly.

4. Replace the slide plate on the back of the remote control.

1. Do not operate this product while it is still in the packaging.

2. Battery is to be inserted with the correct polarity.

3. Replace only with 9 volt type battery (6F22, 6LR61 or 23F6-220).

4. Exhausted battery is to be removed from the battery holder.

5. The supply terminals are not to be short circuited.

6. Do not throw battery into fire.

7. Battery should never be left in the product when not in use for long periods of time.

8. Never allow any plastic part to come in contact with a source of heat or flame.

9. This is a Christmas decoration. This is not a toy. Keep out of the hands of small children.

Waste electrical products should not be disposed of with household waste. Please recycle where 

facilities exist. Check with your local authority or retailer for recycling advice. This is applies to the battery 

also.

©2017 Santa's Best LTD, Room 412-413,  Tower 1, Harbour Centre, 1 Hok Cheung Street, Hunghom, Kowloon, HK. All rights reserved. MADE IN CHINA   PRINTED IN CHINA

Actual LED cover may vary according to product purchased.

Before changing LEDs, make sure set is unplugged.

Step 3: Replace LED with only 5 volt, 60 mA 

 

LED type LED (provided with product).

Step 1: Grasp plug and remove from the receptacle 

 

or other outlet device. Do not unplug by 

 

pulling cord.

Step 2: Hold LED by the plastic base and pull 

 

LED/base straight out of socket.

LED
BASE
SOCKET

LED

BASE
LED

WIRES

MODEL NO. DP30-S360  DP30-S400  DP30-S420  DP30-S480  

DP30-S540  DP30-S600  DP30-S660  DP30-S780 

RGB/RGBW - Unsealed Socket - Instruction Manual - English
Size:  10” x 7.5”
Date:  3/8/17

2017 THD / THD.COM / AH / GC