Guangde Ledup Enterprise Inc. STR51801B1C ユーザーズマニュアル
MODEL NO
IMPORTANT SAFETY INSTRUCTIONS
When using electric products, basic precautions should always be followed including the following:
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications; connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let LEDs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product―not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.
l) Do not perform any maintenance or troubleshoot for bad or broken LEDs while the power is on.
m) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
n) Do not cover the product with cloth, paper or any material not part of the product when in use.
o)
To
reduce the risk
of fire and electric
shock: a)
Do
not install
on trees having needles, leaves
or
branch coverings
of metal
or materials which look like metal, and b)
Do
not mount
or
support
strings
in a manner that can cut
or damage wire insulation.
p)
Read and follow all instructions that are
on the product
or provided with the product.
q)
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place
on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, including tree branches,
or bushes to avoid any undue strain or stress on the product conductors, connections, and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
NOTE:
This equipment has been tested and found to
comply with the limits
for a
Class B digital device, pursuant to
Part 15
of the
FCC
Rules.
These limits
are designed to
provide
reasonable protection against harmful interference in a
residential installation.
This
equipment generates,
uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is
no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio
or television
reception, which can be
determined by turning the equipmentoff and on, the user is encouraged to
try
to
correct the interference by
one
or more
of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealeror an experienced radio/TV technician for help.
LED
FOR INDOOR AND OUTDOOR USE
This device complies with Part 15 of the FCC
Rules.
Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes
or modifications to this unit not expressly approved by the party
responsible for compliance could void the
user’s authority to
operate the equipment.
CAUTION:
1. This lighting string is rated 29 Volt DC for driving a maximum of 250 – 10000 3 volt, 20 mA LED type lamps based on the LED Driver
model as noted below:
Do not replace or modify any connectors on this product. Discard product if connector is damaged. Make sure connectors are fully
inserted and any connector rings are twisted until completely secured such that the ring can no longer be turned and the two
portions of the connector are completely assembled.
2. DO NOT USE A DIMMER SWITCH OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A
2. DO NOT USE A DIMMER SWITCH OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A
LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR LIGHT STRING OR CAUSE PERSONAL INJURY. THIS ACTION WILL
RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT.
LED Driver (adapter plug)
Model J-29V3W
500 LED Lamps
250 LED Lamps
1000 LED Lamps
10000 LED Lamps
500 LED Lamps
3000 LED Lamps
Model J-29V9W
Model J-29V14W
5000 LED Lamps
1500 LED Lamps
Model J-29V29W
Maximun LEDQuantity(Solid Color) Maximun LEDQuantity(Color Change)
Starry Light - Safety Instruction - English
Size: 10” x 5.75”
Size: 10” x 5.75”
2018
2018 QVC-CIJ
Date:1/25/2018
©2018 Santa's Best LTD, Room 412-413, Tower 1, Harbour Centre, 1 Hok Cheung Street, Hunghom, Kowloon, HK. All rights reserved. MADE IN CHINA PRINTED IN CHINA
15STR5-1801B1