Anfair Electronics Plastic Factory MA5 ユーザーズマニュアル
SAVING MEMORY PRESETS
1 Press and hold M to enter manual tuning mode.
2 Press – or + to tune the transmitter to the frequency that
2 Press – or + to tune the transmitter to the frequency that
you want to save.
3 While still in tuning mode, press and hold a button (1, 2, or
3) to save the frequency to the corresponding number. Once
the frequency is saved, the screen will flash the correspond-
ing number once and return to display the frequency.
the frequency is saved, the screen will flash the correspond-
ing number once and return to display the frequency.
USING YOUR TRANSMITTER
• Play music on your iPhone, iPad, or iPod, then adjust your
radio’s volume.
TROUBLESHOOTING
Audio has static
• Make sure that your radio is tuned to an FM radio frequency.
• Make sure that your radio and transmitter are tuned to the
• Make sure that your radio is tuned to an FM radio frequency.
• Make sure that your radio and transmitter are tuned to the
same frequency.
• Try using a different FM radio frequency.
No or low audio
• Make sure that the cables are correctly and securely
No or low audio
• Make sure that the cables are correctly and securely
connected to your vehicle’s cigarette lighter receptacle and
audio device.
audio device.
• Make sure that your radio and transmitter are tuned to the
same frequency.
• Turn up the volume of your audio device or radio.
• Try using a different FM radio frequency.
• Try using a different FM radio frequency.
SPECIFICATIONS
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution: Changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution: Changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to operate the
equipment.
V2 ENGLISH 15-0485
Frequency range
Cable length
Power charging output
88.1 - 107.9 MHz (U.S.)
39.37" (1 m)
12 watts (5V@2.4 A)
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
NS-MA5FMT_NS-MA5FMT-C_15-0485_QSG_V2_EN.ai 2 5/5/2015 3:10:10 PM
NS-MA5FMT_NS-MA5FMT-C_15-0485_QSG_V2_EN.ai 2 5/5/2015 3:10:10 PM