HUIZHOU FORYOU GENERAL ELECTRONICS CO. LTD. VX3024 ユーザーズマニュアル

7

•  When the “BRAKE” cable is connected to the brake switch, the display on the TFT monitor

will display video only when the vehicle is applied.

•  Parking brake function is overridden when the video source is set to REVERSE.

•  When the parking brake inhibit is active, the front monitor displays Warning information,

preventing the driver from watching content while driving. Rear video screens are not affected.

Press [

] knob to mute the volume from the unit. Press again to restore the volume. [ 

 ] is 

displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute 

function. 

Press the [

]

knob on the unit to turn the unit on. The buttons on the front of the unit light

up for a moment and the current mode status appears in the LCD.

Press and hold the [

]

knob to power off the unit.

Demo mode is used to illustrate the functions of the unit. Touch the screen to exit it.

Demo mode is default on. You can turn it off in Setting menu.

An audible beep tone confirms each function selection. The Beep tone can be disabled through

the Setup menu.

Press the [

 MENU ] button on the front panel to display the playing

source menu.

1.  Prev or Next: Touch to view the previous or next page of 

playing

sources.

2. 

Playing source icon: touch to access corresponding work mode.

3.  Clock

To increase or decrease the volume level, turn the [

]

knob

on the front panel. The volume range is from “0” to “50”. The LCD

or TFT screen displays the volume level for 3 seconds.

1

1

2

3