PARROT DRONE SAS MPP3 ユーザーズマニュアル
© Parrot, June 2018
USER GUIDE v0.9.2 – send feedback to technical.writer©parrot.com
20
’s smart LiPo battery is preinstalled on the drone and should always be reinstalled in
the same way, with the LEDs and power button facing up, to avoid irrecoverable electric
damage to the battery, to the drone, or to both.
damage to the battery, to the drone, or to both.
The smart battery can be charged whether it is installed on
or not. However, you will
need to remove the battery from the drone to access your microSD card and retrieve the
photos and videos you have taken. Refer to the
photos and videos you have taken. Refer to the
“Retrieving media”
section of this guide for
further information.
When handling
, you should never apply pressure and generally avoid touching the
drone’s camera and gimbal – its most sensitive parts. The following directions will help you
handle your drone and battery safely.
handle your drone and battery safely.
Battery removal
To remove the smart battery from the drone, unfold the back arms of
. Set the
drone on a flat and even surface (such as a table), and press the push-button which
connects the battery to the body of the drone with your thumb. Gently slide your
thumb and the battery toward the back of
connects the battery to the body of the drone with your thumb. Gently slide your
thumb and the battery toward the back of
. When the hook of the push-button
is disengaged from the body of the drone, lift the battery away from
.
: battery removal