Balluff GmbH BFIDU02 ユーザーズマニュアル
BF-IDU02
RFID-Reader
Connecting the Device
The device has to be connected to one of the head connectors "H1" .. "H4" of a Balluff BIS V
control unit via standard 4-wire cable with M12 industry connectors. The control unit delivers
power supply and controls the device over this connection.
The device has to be connected to one of the head connectors "H1" .. "H4" of a Balluff BIS V
control unit via standard 4-wire cable with M12 industry connectors. The control unit delivers
power supply and controls the device over this connection.
Make an additional ground connection to the Functional Ground terminal (Symbol
) either
directly or using an RC combination to ground.
The control unit itself needs to be connected to a power supply and the customer's PLC unit.
See the BIS V manual for details.
Mounting
Before operating, the device has to be fixed mounted with at least 2 screws of M4 or M5 size in
mounting holes at back side (see image).
The BF-IDU02 device may be mounted in any direction, the operating direction of the integrated
antenna is towards the front containing the "BIS VU Identification Systems" label.
Optional mounting plates are available for installing the device.
See the BIS V manual for details.
Mounting
Before operating, the device has to be fixed mounted with at least 2 screws of M4 or M5 size in
mounting holes at back side (see image).
The BF-IDU02 device may be mounted in any direction, the operating direction of the integrated
antenna is towards the front containing the "BIS VU Identification Systems" label.
Optional mounting plates are available for installing the device.
The antennas of the identification system BIS U transmit ultra-high frequency electromagnetic
waves. People should not remain within close range of the UHF antenna for long periods
(several hours). When selecting the installation position for the BF-IDU02 device, make sure
that the minimum distance between the UHF antenna and the workplace is 25 cm.
waves. People should not remain within close range of the UHF antenna for long periods
(several hours). When selecting the installation position for the BF-IDU02 device, make sure
that the minimum distance between the UHF antenna and the workplace is 25 cm.
BF-IDU02
BIS V-6xxx