Well-Life Healthcare Limited. WR2605AOTCTX ユーザーズマニュアル

 

17

 
Always check the unit and accessories before use to prevent damage and defects; these are some of 
the simple checks: 
 
1.  Make sure the Remote and Receiver(s) have a sufficient charged. 
2.  Make sure the Remote and Receiver(s) turn on and in 3 meters (9 feet) away from each other, for 

good quality of receiving distance …  

 
 

The Remote is not turning on or 
I cannot see anything on the screen  

Ensure that the remote has been fully charged.  
 

The power light on the Receiver(s) 
flashes continuously. 

 

Charge the Receiver(s) or it will turn off automatically. 

The Remote and/or Receiver(s) do not 
seem to be charging.  

 

Ensure the USB Cable is correctly into the Remote/ 
Receiver(s) and firmly plugged into the AC adaptor and 
into the electrical socket on the other side.  

Receiver(s) does not pair with remote  

The remote does not control Receiver(s) 
well  

●  Make sure the receiver is fully charged, and turned 

on, away from Remote in 3 meter distance.  

●  Try to restart the remote and receiver(s).  
 

Stimulation causes discomfort  

●  Electrodes lose their adhesive capacity and no 

longer provide adequate contact with skin. 

●  Electrodes are worn and must be replaced.  
●  Change the positing of the electrodes slightly. 
●  Choose Program that is appropriate to your needs 

or gives you the greatest pleasure.  

Stimulation does not produce the usual 
sensation  

●  Check that all settings are right and check 

electrodes are properly positioned. 

●  Change the positing of the electrodes slightly.