ZF Friedrichshafen AG AFIS5001 ユーザーズマニュアル
10
3 Installing the USB driver
System requirements:
Windows XP, Vista or 7, USB 2.0 connection.
Windows XP, Vista or 7, USB 2.0 connection.
1 Copy the "Cherry_EHS-RF_Software" folder from
the CD onto your computer.
2 Connect the receiver.
• Comfort evaluation kit:
Plug the receiver stick into the computer so that
the components (LEDs) can be seen on the cir-
cuit board. Use a USB hub or an extension cable
if necessary.
the components (LEDs) can be seen on the cir-
cuit board. Use a USB hub or an extension cable
if necessary.
• Engineer evaluation kit:
Connect the receiver circuit board to the com-
puter using the USB cable provided.
puter using the USB cable provided.
The yellow LED flashes on the receiver.
The device driver installation prompts you to
install the driver software. The drivers for 32- and
64-bit variants are located in the "Cherry_EHS-
RF_Software/Driver" folder.
install the driver software. The drivers for 32- and
64-bit variants are located in the "Cherry_EHS-
RF_Software/Driver" folder.
3 Follow the instructions in the installation wiz-
ard. If problems arise, you will find detailed video
instructions on the CD.
instructions on the CD.
The yellow LED lights up on the receiver.