DR-Tech Co. Ltd. I DR-100 ユーザーズマニュアル

“You can forget where you left your car 
keys or your glasses. But no one 
imagines a scenario in which one for 
gets the most important possession of 
all: your baby. so that even with your 
baby out of sight in the backseat, you'll 
never let your baby down.”

With the CarMinder app and CarMinder 
device , You can receive 2 alert if use 
with Smartphone. the CarMinder device 
is independent and will start work 
Automatically while car switch On/Off. 
No need to charge just plug it.

CarMinder is also a hand free Bluetooth 
speaker so you can use it to receive a 
phone call.

Important Notice: in order for the CarMinder to 
work properly you must check that when you 
switch the car on than you have electric power in 
the cigarette lighter socket, and when you turn the 
car off the power close.( if it is not working this 
way than an easy action need to be made by car 
service).

1. Place the CarMinder device in the cigarette 
    charger and switch on the car switch.
2. CarMinder active, choose your language by 
    long press OK .(can't choose language when 
    Bluetooth connected to the device)
3.The CarMinder device now ready to work, While 
    switch ON the car you will receive a Voice 
    message that CarMinder is ON and if you have 
    Smartphone than follow the instruction how to 
    use the Smartphone together with the free app 
   “CarMinder”.

*. Pair with CarMinder:
    On your mobile phone active Bluetooth and  

   search CarMinder device name . choose 
   CarMinder. than device will connect. Open the 
   CarMinder App. remember the code for the APP 
   is: 1965.The CarMinder app will search for 
   Bluetooth device please choose CarMinder. and 
   setup the App function.

*. Emergency contact :
   you can choose a contact to add, if you didn't 
   confirm the message that appear on your mobile 
   after you walk out from the car and the Bluetooth 
   disconnect from CarMinder, this contact will 
   receive an SMS message and call, if you choose 
   it in the setting. After you done configure all 
   setting on the App than you press ENABLE, and 
   the APP will work on the background.

Rated operating voltage : 12-24V

Speaker:  Φ36  8Ω1W  5.0H

USB Output:  (5V/2.4A)*2

Working Temp.:  0~80 degrees Celsius       

SNR : >60dB

Distortion:  <0.1%

Frequency Response:  20Hz-15Khz

Left and right channel separation:  >60dB

Bluetooth Version : 4.0

Sound  processing : A2DP (Advance Audio 

Distribution Profile)

Bluetooth transmission distance:  10M

Bluetooth microphone effective range:  0.5~2M

LED indicator

Volume Up/Down 
Track Forward/Rewind 

OK Button for choose language

USB charge port

Microphone

Call button, Play/Pause

please visit us on: www.carminder.co 
Support contact: support@carminder.co       

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following 
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different 
  from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for 
  help.

Caution: 
Any changes or modifications to this device not explicitly 
approved by manufacturer could void your authority to operate 
this equipment. This device complies with part 15 of the FCC 
Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference. 
(2) this device must accept any interference received, including 
      interference that may cause undesired operation.

These device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure 
condition without restriction.

1. According to the answer key on the phone.
2. Press the call button on the carminder.

1. According to the hang up button on the phone.
2. Press the call button on the carminder.

1. According to the hang up button on the phone.
2. When the phone rings continue to hold the 
carminder on the call button for about 1 second.

1. Use the phone keyboard input call number and 
then click the

 call button, the call is automatically 

transferred to the carminder.

 

1. In standby mode click carminder call for about
2 seconds to loosen.

 

1. Volume: use + - to adjust the volume of the 
    device, the volume of the voice alert is fixed 
    and can’t change.
2. Answer and hang a call – press the answer 
    button to answer and to reject or hang the call.
    USB- 2 USB port for charging devices.

1. Press the volume + to choose next song 
2. Press the volume - to choose last song.

1. Press and hold the volume + key to increase 
   volume 
2. Press and hold the volume - ket to reduce the 
   volume.