Blaupunkt Technology Americas S.A. NEWYORK750 ユーザーズマニュアル

ページ / 27
5
DEUTSCHENGLISH
Placing the device in operation
Switching on/off
Switching on/off with the   button
  For switch-on, press the   button.
  For switch-off, hold the   button pressed for more 
than 2 seconds.
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle 
ignition and it was switched off with the   button, it is 
switched on or off with the ignition.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off) to 39 
(maximum).
  Press the   button and drag left/right on the volume 
bar to change the volume.
Muting the car sound system (Mute)
  Briefly press the   button to mute the device or to 
reactivate the previous volume.
Main menu
In the main menu, you press the buttons on the touch-
screen to call up the different sources and operating 
modes. 
  Press the [ 
 ] button.
- Or -
  In the current source, press the top left corner.
The main menu is displayed. 
As long as you do not select a new audio source, the 
last active audio source is played back.
Note:
The figures used in these instructions are intended 
to facilitate the explanations and details may deviate 
from your device.
Setting the reception area
This car sound system is designed for operation in 
different regions with different frequency ranges and 
station technologies. The factory default of the reception 
area is "USA1 (FM/AM)". You can set a different reception 
area.
  In the main menu, press the [ 
 ] button.
The Setting menu is displayed.
  In the left area of the Setting menu, press the 
[ General ] button.
The current setting is displayed behind "Radio Area".
  Tap on the [ Radio Area ] button to display the list of 
available reception areas.
  Select the desired reception area.
The list is hidden, the selected reception area is set.
  Press the [ 
 ] button. 
The main menu is displayed again. 
Startup