Macari Baby Inc. 401AM ユーザーズマニュアル
3
Tighten screw until only 1/4” (6.3mm)
of the screw is exposed (screw driver
not included).
¼”
®
ON
6
Be sure to test your Monitor’s reception before initial use.
We also recommend testing your Monitor’s reception periodically.
PLEASE KEEP IN MIND THAT THE MOVEMENT & POSITIONING VIDEO
MONITOR WILL NOT PROVIDE THE SAME LEVEL OF PICTURE QUALITY AS
YOUR TELEVISION WITH CABLE, SATELLITE DISH, OR DIGITAL SERVICE.
Monitor Setup • Adult Assembly Required
Movement Unit Setup • Adult Assembly Required
Plug Monitor AC Adapter into
Monitor and hold the power button
on top of Monitor for 5 seconds.
The Movement Unit will transmit movement info and baby’s orientation (side,
stomach and back) to the Camera. The Camera will transmit this information to the
Monitor and display that information on the screen. For best results, make sure
the Movement Unit is within 30 feet of the Camera.
5
Secure the cord to
the wall using the 6
Security Clips included
to keep cord away from
baby’s reach.
Be sure to
test reception
and Camera
positioning.
at least
3ft
IMPORTANT
PLUG I
N
4
®
100%
®
®
2
1
ATTACHING MOVEMENT UNIT: Place the top of the
Movement Unit with logo facing UP over baby’s
clothing and then slip the magnetic bottom unit
behind the clothing with the magnets
away from baby.
The two pieces should
connect together with the
clothing in the middle.
7
Press the power button on the center top of the Movement Unit for 4
seconds to power on. You should see movement info and orientation of
the baby (side, back, stomach) on the monitor screen.
Research shows that sleeping
on their back is the safest
position for babies.
Press power on the
movement unit until you
hear a beep.
SIDE
STOMACH
BACK
NOTE: FOR BEST RESULTS, THE WEARABLE UNIT SHOULD BE PLACED ON A
SNUG-FITTING ONSIE ON THE CENTER OF THE BABY’S CHEST.
The Movement Unit will flash every 10 seconds:
Green: Full Battery
Amber: Charge Soon
Red: Low Battery - Charge Immediately
Movement &
Positioning Data
Max 30 Feet
Max 600 Feet
®