HMD global Oy TA-1049 ユーザーズマニュアル
Main camera
Microphone
Front camera
SIM cards
MicroSD card
Earpiece
USB connector
Loudspeaker
Volume keys
Microphone
Power/Lock key
Headset connector
Get Started
Nokia x
Nokia x
TA-1049/TA-1074
EN -LATAM
1. Insert the SIM and memory
card
1.
Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2.
Put the nano-SIM in slot 1 on the tray with the
contact area face down. If you have a second SIM,
put it in slot 2.
put it in slot 2.
3.
Open the memory card tray: push the tray opener
pin in the tray hole and slide the tray out.
4.
Put the memory card in the memory card slot.
5.
Slide the trays back in their slots.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the pri-
mary SIM supports 4G/3G/2G networks, while the
secondary SIM can only support 3G/2G. For more
information on your SIM cards, contact your service
provider.
your SIM1 and SIM2 are both LTE SIM cards, the pri-
mary SIM supports 4G/3G/2G networks, while the
secondary SIM can only support 3G/2G. For more
information on your SIM cards, contact your service
provider.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
several minutes before the charging indicator is dis-
played.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
go to www.nokia.com/mobile-support.
PKES255004A V1.0
xxxxxxxxxx