HMD global Oy TA-1080 ユーザーズマニュアル

1. With the phone facing down, put your fingernail 

in the USB connector, bend the back cover open, 

and remove it.
2. Slide the SIM card holder to the left and open it 

up. Put a nano-SIM card in the SIM slot with the 

contact area face down. Close down the holder and 

slide it to the right to lock it in place.
3. If you have a dual-SIM phone, slide the SIM card 

holder of the SIM2 slot to the right and open it up. 

Put your second nano-SIM card in the slot with the 

contact area face down. Close down the holder and 

slide it to the left to lock it in place.
4. If you have a microSD memory card, slide the 

card in the memory card slot.
5. Press the top edge of the back cover against the 

top edge of your phone, and then snap the cover 

into place, locking all the hooks around the edges of

the cover.

Warning! Do not open the battery cover, it may

harm your device.

 Note: Switch the device off and disconnect the 

charger and any other device before removing any 

covers. Avoid touching electronic components while 

changing any covers. Always store and use the 

device with any covers attached.
Use only original nano-SIM cards. Use of incompati-

ble SIM cards may damage the card or the device, 

and may corrupt data stored on the card.

Use only compatible memory cards approved for 

use with this device. Incompatible cards may dam-

age the card and the device and corrupt data stored 

on the card.

Important: Do not remove the memory card 

when an app is using it. Doing so may damage the 

memory card and the device and corrupt data 

stored on the card.

Both SIM cards are available at the same time when 

the device is not being used, but while one SIM card 

is active, for example, making a call, the other may 

be unavailable.

Plug a compatible charger into a wall outlet, and 

connect the cable to your phone. Your phone 

supports the USB micro-B cable. You can also 

charge your phone from a computer with a USB 

cable, but it may take a longer time.

If the battery is completely discharged, it may take 

several minutes before the charging indicator is 

displayed.

To switch your phone on, press and hold the power 

key until the phone vibrates. The phone guides you 

through the setup.

For an online user guide and troubleshooting help, 

go to 

PKE2M55053A V1.0

xxxxxxxxxx

TA-1080/TA-1092

EN-EN3

Headset connector

Microphone

Camera

Flash

Front camera

Proximity sensor

Earpiece/

Loudspeaker

Volume keys

Power/Lock key

USB connector

Loudspeaker