HMD global Oy TA-1085 ユーザーズマニュアル

1. Open the SIM and memory card tray: push the 

tray opener pin in the tray hole and slide the tray 

out.
2. If you have a single-SIM phone, put a nano-SIM 

card in slot 1 and a memory card in slot 2 on the 

tray with the contact areas face down. If you have a 

dual-SIM phone, put a nano-SIM card in slot 1 and 

either a second SIM or a memory card in slot 2 with 

the contact areas face down.
3. Slide the tray back in the slot.
Use only original nano-SIM cards. Use of incompati-

ble SIM cards may damage the card or the device, 

and may corrupt data stored on the card.

Use only compatible memory cards approved for 

use with this device. Incompatible cards may dam-

age the card and the device and corrupt data stored 

on the card.

 

Important: Do not remove the memory card 

when an app is using it. Doing so may damage the 

memory card and the device and corrupt data 

stored on the card.

Both SIM cards are available at the same time when 

the device is not being used, but while one SIM card 

is active, for example, making a call, the other may 

be unavailable.

Plug a compatible charger into a wall outlet, and 

connect the cable to your phone. Your phone 

supports the USB-C cable. You can also charge your 

phone from a computer with a USB cable, but it may 

take a longer time.

If the battery is completely discharged, it may take 

several minutes before the charging indicator is 

displayed.

To switch your phone on, press and hold the power 

key until the phone vibrates. The phone guides you 

through the setup.

For an online user guide and troubleshooting help, 

go to 

TA-1085/TA-1096

EN-LATAM

Main camera

Flash

Fingerprint 

sensor

Headset connector

Microphone

Microphone

Loudspeaker

Front camera

Earpiece

USB connector

SIM and memory 

card slot

Proximity 

sensor

Volume keys

Power/Lock key