ACOM Ltd 700S ユーザーズマニュアル

24

24

or involuntary switching to Operate mode. While locked, an attempt for entering Operate mode will result 

in a message:

“OPERATE MODE IS LOCKED”

The other preference items need no explanation.

This function reads on the screen the information stored in the memory about the last 28 HARD FAULT 

protection trips (Fig.5-5). By pushing the FILE button, the information may be also downloaded in a plain-

text format file through the RS232 port and a computer using a standard terminal emulating program 

(TTY). The RS232 protocol is: 9600, 8 N 1.

                                                         

   

Fig. 5-5 Function FAULTS LOG

Four different factory reset levels are available (Fig.5-6).

In order to confirm the selected action the operator must push the ACTION - left (YES) button once 

more. After restoring the default settings, the control will return to the MENU SELECTION screen - Fig. 

5. If the ACTION – right (NO) button is pressed, the “NO” is selected again, and the control will not leave 

the current position. At pressing the EXIT button in this position, the control leaves this menu without 

changing anything and returns in the previous window (the MENU SELECTION screen – Fig. 5).