Circuit Design Inc. KST24W ユーザーズマニュアル
OG_KST24_v
Regulatory Statement for FCC
FCC ID: V9X
This device
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
transmitter.
transmitter.
Caution:
compliance could void the user's authority to operate the equipment.
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
—
—
—
connected.
—
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
—
—
—
connected.
—
OG_KST24_v
Regulatory Statement for FCC
FCC ID: V9X
-KST24W
This device
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
transmitter.
transmitter.
Caution:
compliance could void the user's authority to operate the equipment.
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circui
connected.
—Consult the dealer or an experienced radio/TV technician for help.
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circui
connected.
—Consult the dealer or an experienced radio/TV technician for help.
OG_KST24_v
Regulatory Statement for FCC
This device
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
transmitter.
transmitter.
Caution:
compliance could void the user's authority to operate the equipment.
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
connected.
Consult the dealer or an experienced radio/TV technician for help.
OG_KST24_v
Regulatory Statement for FCC
This device
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
transmitter.
transmitter.
Caution: Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
connected.
Consult the dealer or an experienced radio/TV technician for help.
OG_KST24_v
Regulatory Statement for FCC
This device
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
transmitter.
transmitter.
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy that is deemed to comply without testing of specific absorption rate (SAR)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
RF energy that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
connected.
Consult the dealer or an experienced radio/TV technician for help.
OG_KST24_v10e
Regulatory Statement for FCC
This device complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This transmitter must
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
10e
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
This transmitter must
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
This transmitter must
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
This transmitter must not be co
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
not be co
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
not be co
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radi
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
Regulatory Statement for FCC
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
not be co
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
not be co-located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
complies with part 15 of the F
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
Caution: Exposure to radio frequency radiation
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
12
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circui
Connect the equipment into an outlet on a circui
Consult the dealer or an experienced radio/TV technician for help.
12
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
Connect the equipment into an outlet on a circuit different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
t different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
t different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
t different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
Consult the dealer or an experienced radio/TV technician for help.
OPERATION GUIDE
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Regulatory compliance information
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
interference received, including interference that may cause undesired operation.
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide re asonable protection
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
pursuant to part 15 of the FCC Rules. These limits are designed to provide re asonable protection
against harmful interference in a residential installation. This equipment generates
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
that is deemed to comply without testing of specific absorption rate (SAR)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
against harmful interference in a residential installation. This equipment generates,
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
television reception, which can be determined by turning the equipment off and on,
encouraged to try to correct the interference by one or more of the following measures:
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
television reception, which can be determined by turning the equipment off and on, the user is
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
the user is
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
the user is
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
the user is
t different from that to which the receiver is
OPERATION GUIDE
Circuit Design, Inc.
CC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
located or operated in conjunction with any other antenna or
Any changes or modifications not expressly approved by the party responsible for product
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
asonable protection
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
o communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
the user is
t different from that to which the receiver is