Zebra USB2.0 - miniUSB2.0 P1031365-055 ユーザーズマニュアル

34

QLn Series User Guide

Verify the Printer Is Working

Before you connect the printer to your computer or portable data 

terminal, make sure that the printer is in proper working order.  You 
can do this by printing a configuration label using the “two key” meth-
od.  If you can’t get this label to print, refer to “Troubleshooting”.

Printing a Configuration Label

1. Turn the printer off.  Load the media compartment with 

journal media (media with no black bars printed on the 
back)

2. Press and hold the Feed Button.
3. Press and release the Power button and keep the Feed 

button pressed.  When printing starts, release the Feed 
button.  

   The unit will print a line of interlocking “x” characters to 

ensure all elements of the print head are working, print out the 
version of software loaded in the printer and then print the re-
port. Note that the report can also be printed from the Info 
(Help) menu on the LCD.

  The report indicates model, serial number, baud rate, and more 

detailed information on the printer’s configuration and parameter set-
tings. (See the Troubleshooting Section for sample printouts and a fur-
ther discussion on how to use the configuration label as a diagnostic 
tool.)

Connecting the Printer

The printer must establish communications with a host ter-

minal which sends the data to be printed. Communications  
occur in four basic ways:

•  QLn Series printers can communicate by cable via either 

RS-232C or USB 2.0 protocols. USB drivers are included 
in the Zebra Designer Driver which can be downloaded 
from 

www.zebra.com/drivers

.

•  By means of a Bluetooth™ short range radio frequency link. 

(Optional)

•  By means of a wireless LAN (Local Area Network) per 802.11 spec-

ifications. (Optional)

•  By means of the Ethernet when docked on the Ethernet cradle. 

(Optional)