Dataram GRL1066RQ/16GB プリント
GRL1066R
DDR3-1066, PC3-8500, Registered, ECC, 1.5V, 240-pin DIMMs
GRL1066R
02-June-10
Products in Family
GRL1066RQ/4GB (1 x 4GB 4Rx8 DIMMs)
GRL1066R/8GB (1 x 8GB 2Rx4 DIMMs)
GRL1066RQ8/8GB (1 x 8GB 4Rx4 DIMMs)
GRL1066RQ/16GB (1 x 16GB 4Rx4 DIMMs)
GRL1066R/8GB (1 x 8GB 2Rx4 DIMMs)
GRL1066RQ8/8GB (1 x 8GB 4Rx4 DIMMs)
GRL1066RQ/16GB (1 x 16GB 4Rx4 DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
Each GRL1066R upgrade consists of a single DDR3-
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Dataram Product
Dell Product
Supported in these Dell systems:
GRL1066RQ/4GB
GRL1066R/8GB
GRL1066RQ8/8GB
GRL1066RQ/16GB
GRL1066R/8GB
GRL1066RQ8/8GB
GRL1066RQ/16GB
A3116520, A3597109
A3597108
Not Offered by Dell
A3138306
A3597108
Not Offered by Dell
A3138306
Dell PowerEdge M610, M710, M910, R310, R410, R510,
R610, R710, R810, R910, T310, T410, T610, T710,
C1100, C2100, C6100 and Precision T5500, T7500
R610, R710, R810, R910, T310, T410, T610, T710,
C1100, C2100, C6100 and Precision T5500, T7500
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.