Gefen GTB-DVIKVM-ELR-BLK プリント
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefentoolbox.com
Extra Long Range Extender for DVI, USB, RS232, and
Ethernet over 2 CAT-5
The GefenToolbox DVIKVM ELR extends DVI, USB,
RS-232, and Ethernet to a workstation located to 330 feet
(100 meters) using two CAT-5 cables. 480 Mbps data
rates are supported for USB2.0, in addition to backward-
compatibility with USB 1.1. The Receiver Unit allows the
connections of up to two (2) USB devices, providing
access to printers, scanners, cameras, external storage
media, digital signage, and automated control systems.
This GefenToolbox product uses Gefen ELR technology,
allowing DVI, USB, and RS-232 to travel along the same
one CAT-5 cable, reducing the number of CAT-5 cables
used. Ethernet and RS-232 are also extended to 330 feet
(100 meters), allowing access and control of RS-232 and
IP-based devices.
RS-232, and Ethernet to a workstation located to 330 feet
(100 meters) using two CAT-5 cables. 480 Mbps data
rates are supported for USB2.0, in addition to backward-
compatibility with USB 1.1. The Receiver Unit allows the
connections of up to two (2) USB devices, providing
access to printers, scanners, cameras, external storage
media, digital signage, and automated control systems.
This GefenToolbox product uses Gefen ELR technology,
allowing DVI, USB, and RS-232 to travel along the same
one CAT-5 cable, reducing the number of CAT-5 cables
used. Ethernet and RS-232 are also extended to 330 feet
(100 meters), allowing access and control of RS-232 and
IP-based devices.
How It Works:
Place the DVIKVM ELR Sender Unit next to the computer
source. Use the included DVI cable to connect the
source to the Sender Unit. Use the supplied USB cable
to connect the USB port to the USB host (source) device.
source. Use the included DVI cable to connect the
source to the Sender Unit. Use the supplied USB cable
to connect the USB port to the USB host (source) device.
Connect the Receiver Unit to the monitor with a DVI cable.
Connect the USB devices to the Receiver Unit. Use two CAT-5 cables,
up to 330 feet (100 meters), to connect the Sender Unit to the
Receiver Unit. Connect a serial cable from the RS-232 port
on the Sender Unit to the RS-232 host device. Connect the RS-232
port on the Receiver Unit to the device used. The Ethernet port on
both the Sender Unit and Receiver Unit are connected to standard
network devices. Connect the included locking power supplies to the
Sender and Receiver Units, then connect both power cords
to any available electrical outlets.
Connect the USB devices to the Receiver Unit. Use two CAT-5 cables,
up to 330 feet (100 meters), to connect the Sender Unit to the
Receiver Unit. Connect a serial cable from the RS-232 port
on the Sender Unit to the RS-232 host device. Connect the RS-232
port on the Receiver Unit to the device used. The Ethernet port on
both the Sender Unit and Receiver Unit are connected to standard
network devices. Connect the included locking power supplies to the
Sender and Receiver Units, then connect both power cords
to any available electrical outlets.
Features:
• Extends DVI resolutions to 1920x1200 @ 60 Hz or 1080p
up to 330 feet (100 meters)
• Extends USB 2.0, RS-232, and Ethernet devices to
330 feet (100 meters)
• Supports 480 Mbps using USB 2.0
• Backward-compatible with USB 1.1 devices
• EDID Management with Local and Pass-through modes
• Industry-standard CAT-5, CAT-5e, or CAT-6 cables recommended
• Locking Power Supplies
• Energy Star compliant
• Wall-mountable
• Available in Black or White
up to 330 feet (100 meters)
• Extends USB 2.0, RS-232, and Ethernet devices to
330 feet (100 meters)
• Supports 480 Mbps using USB 2.0
• Backward-compatible with USB 1.1 devices
• EDID Management with Local and Pass-through modes
• Industry-standard CAT-5, CAT-5e, or CAT-6 cables recommended
• Locking Power Supplies
• Energy Star compliant
• Wall-mountable
• Available in Black or White
Specifications*
• Video Amplifier Bandwidth: 165 MHz
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• DVI Connectors (Sender / Receiver): DVI-I 29-pin
• USB Connector (Sender Unit): Type B
• USB Connectors (Receiver Unit): (2) Type A
• Link Connectors (Sender / Receiver): (2) RJ-45
• Ethernet Connectors (Sender / Receiver): RJ-45
• RS-232 Connector (Sender): DB-9, female
• RS-232 Connector (Receiver): DB-9, male
• RS-232 Baud Rate: 19200 bps
• Power Supply (Sender / Receiver): 5V DC, locking type
• Power Consumption: 10 W per unit (max.)
• Operating Temperature: 0 - 40 °C
• Dimensions: 9.75" W x 1.25" H x 3.4" D
• Shipping Weight: 3 lbs.
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• DVI Connectors (Sender / Receiver): DVI-I 29-pin
• USB Connector (Sender Unit): Type B
• USB Connectors (Receiver Unit): (2) Type A
• Link Connectors (Sender / Receiver): (2) RJ-45
• Ethernet Connectors (Sender / Receiver): RJ-45
• RS-232 Connector (Sender): DB-9, female
• RS-232 Connector (Receiver): DB-9, male
• RS-232 Baud Rate: 19200 bps
• Power Supply (Sender / Receiver): 5V DC, locking type
• Power Consumption: 10 W per unit (max.)
• Operating Temperature: 0 - 40 °C
• Dimensions: 9.75" W x 1.25" H x 3.4" D
• Shipping Weight: 3 lbs.
*Specifications subject to change without notice.
All trademarks are the properties of their respective owners.
GTB-DVIKVM-ELR-BLK
Extra Long KVM Extension with Ethernet to 330 feet