Dataram 16GB DDR3-1066 GRSX1066RQ/16GB プリント
製品コード
GRSX1066RQ/16GB
GRSX1066R
DDR3-1066, PC3-8500, Registered, ECC, 1.5V, 240-pin DIMMs
GRSX1066R
23-Jul-10
Products in Family
GRSX1066R/2GB (1 x 2GB 1Rx4 DIMMs)
GRSX1066R2/2GB (1 x 2GB 2Rx8 DIMMs)
GRSX1066R/4GB (1 x 4GB 2Rx4 DIMMs)
GRSX1066R/8GB (1 x 8GB 2Rx4 DIMMs)
GRSX1066RQ/16GB (1 x 16GB 4Rx4 DIMMs)
GRSX1066R2/2GB (1 x 2GB 2Rx8 DIMMs)
GRSX1066R/4GB (1 x 4GB 2Rx4 DIMMs)
GRSX1066R/8GB (1 x 8GB 2Rx4 DIMMs)
GRSX1066RQ/16GB (1 x 16GB 4Rx4 DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
Each GRSX1066R upgrade consists of a single DDR3-
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
1066 Registered ECC DIMM that conforms to JEDEC’s
DDR3, PC3-8500 standard. One 2K-bit EEPROM is used
for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Dataram Product
Sun Microsystems Product
Supported in these Sun Microsystems systems:
GRSX1066R/2GB
GRSX1066R2/2GB
GRSX1066R/4GB
GRSX1066R/8GB
GRSX1066RQ/16GB
GRSX1066R2/2GB
GRSX1066R/4GB
GRSX1066R/8GB
GRSX1066RQ/16GB
X5866A
Not Offered by Sun
X5867A, X4850A
X5868A, X4851A
Not Offered by Sun
Not Offered by Sun
X5867A, X4850A
X5868A, X4851A
Not Offered by Sun
Sun Fire X4170, X4170 M2, X4270, X4270 M2, X4275,
Netra X4270
Netra X4270
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.