Dataram GRIHS22-13/8GB プリント
GRIHS22
DDR3-1333, PC3-10600, Registered, ECC, 1.5V, 240-pin VLP DIMMs
GRIHS22
19-Apr-10
Products in Family
GRIHS22/2GB (1 x 2GB 1R VLP DIMM)
GRIHS22/4GB (1 x 4GB 2R VLP DIMM)
GRIHS22/8GB (1 x 8GB 2R VLP DDR3-1066
DIMM)
GRIHS22-13/8GB
GRIHS22/4GB (1 x 4GB 2R VLP DIMM)
GRIHS22/8GB (1 x 8GB 2R VLP DDR3-1066
DIMM)
GRIHS22-13/8GB
(1 x 8GB 2R VLP DDR3-1333 DIMM)
Features Description
240-pin JEDEC-compliant Very Low Profile (VLP) DIMMs
133.35 mm wide by 18.7 mm high (.738” x 5.25”)
Data Transfer Rate: up to 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
133.35 mm wide by 18.7 mm high (.738” x 5.25”)
Data Transfer Rate: up to 10.6 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each GRIHS22 upgrade consists of a matched pair of
DDR3 Registered VLP DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C. The 4 and 8GB DIMMs have a heat
shield.
DDR3 Registered VLP DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C. The 4 and 8GB DIMMs have a heat
shield.
Dataram Product
IBM Product
Supported in these IBM systems:
GRIHS22/2GB
GRIHS22/4GB
GRIHS22/8GB
GRIHS22-13/8GB
GRIHS22/4GB
GRIHS22/8GB
GRIHS22-13/8GB
44T1487, 49Y1429
44T1488, 49Y1430
44T1579
46C7451, 49Y1431
44T1488, 49Y1430
44T1579
46C7451, 49Y1431
BladeCenter HS22 (7870), HS22V (7871)
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters.
in millimeters.
Copyright
© 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.