Transition Networks SAPTF3329-115 SAPTF3329-115-NA プリント
製品コード
SAPTF3329-115-NA
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Loop Extender/Isolator
Automatic Ring Down
Specifications
Standards
FCC Part 68, TBR21
Analog Port
(Telephone Emulation or FXS)
Connector: RJ-11
Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 60 ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz
when both ports are terminated at 600 ohms
Connector: RJ-11
Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 60 ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz
when both ports are terminated at 600 ohms
Analog Port
(Central Office Emulation or FXO)
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90 Vp-p
Ring Frequency: 15 – 25 Hz.
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90 Vp-p
Ring Frequency: 15 – 25 Hz.
(Reproduces frequency detected by side A)
Ring Cadence:
Reproduces cadence detected by side A
Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz
when both ports are terminated at 600 ohms
when both ports are terminated at 600 ohms
Voice Frequency
300 Hz – 3 KHz
Switches/Optional Jumpers
Automatic Ring Down/Normal
Status LEDs
LED colors are Green
Fiber Link: ON indicates fiber link up;
In Use: ON indicates unit in use;
Flashing indicates ringing;
Power: ON indicates power is on
Fiber Link: ON indicates fiber link up;
In Use: ON indicates unit in use;
Flashing indicates ringing;
Power: ON indicates power is on
Dimensions
105 Model:
Width: 3.25" [82 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
115 Model:
Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Power
External AC/DC provided; 12 VDC, 1.25A;
unregulated; standard; UL Listed
unregulated; standard; UL Listed
Environment
0 – 50°C Operating Temperature;
-25°C – 85°CStorage Temperature
5% – 95% humidity (non-condensing); 0 – 10,000 ft.
-25°C – 85°CStorage Temperature
5% – 95% humidity (non-condensing); 0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
UL Listed and CSA certified
Regulatory Compliance
FCC Class A; VCCI Class A; EN 55022 (CISPR 22)
Class A; ICES 003; CE Mark
Class A; ICES 003; CE Mark
Warranty
Lifetime
Ordering Information
Line Side FXS: SAPTF3311-105
Customer Side FXO: SAPTF3311-115
Customer Side FXO: SAPTF3311-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Line Side FXS: SAPTF3313-105
Customer Side FXO: SAPTF3313-115
Customer Side FXO: SAPTF3313-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Line Side FXS: SAPTF3314-105
Customer Side FXO: SAPTF3314-115
Customer Side FXO: SAPTF3314-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Line Side FXS: SAPTF3315-105
Customer Side FXO: SAPTF3315-115
Customer Side FXO: SAPTF3315-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Line Side FXS: SAPTF3317-105
Customer Side FXO: SAPTF3317-115
Customer Side FXO: SAPTF3317-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs
Line Side FXS: SAPTF3329-105*
Customer Side FXO: SAPTF3329-115*
Customer Side FXO: SAPTF3329-115*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: SAPTF3329-106*
Customer Side FXO: SAPTF3329-116*
Customer Side FXO: SAPTF3329-116*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: SAPTF3329-107*
Customer Side FXO: SAPTF3329-117*
Customer Side FXO: SAPTF3329-117*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Line Side FXS: SAPTF3329-108*
Customer Side FXO: SAPTF33129-118*
Customer Side FXO: SAPTF33129-118*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
*Note: Single Fiber products should be paired by
application:
application:
Loop Extender/Isolator Application
Line Side FXS: CAPTF3329-101
Customer Side FXO: CAPTF3329-116
Line Side FXS: CAPTF3329-101
Customer Side FXO: CAPTF3329-116
Automatic Ring Down Application
Line Side FXS: CAPTF3329-107
Customer Side FXO: CAPTF3329-108
Line Side FXS: CAPTF3329-107
Customer Side FXO: CAPTF3329-108
Connect central-office voice grade signals
to distant Plain Old Telephone equipment
(POTS) utilizing standard telephone signal-
ing. Two units are required to implement an
end to end system. Unit A connects to a
telephone line or PBX and has the ability to
detect ringing voltages and to act as a tele-
phone (LINE SIDE FXS). Unit B is the recip-
rocal unit and has the ability to act as a
Central Office and connects to a telephone
device (CUSTOMER SIDE FXO).
to distant Plain Old Telephone equipment
(POTS) utilizing standard telephone signal-
ing. Two units are required to implement an
end to end system. Unit A connects to a
telephone line or PBX and has the ability to
detect ringing voltages and to act as a tele-
phone (LINE SIDE FXS). Unit B is the recip-
rocal unit and has the ability to act as a
Central Office and connects to a telephone
device (CUSTOMER SIDE FXO).
Devices must be used in pairs. Typical in-
stallation will include a chassis card
[CAPTF] installed in the Point System™ lo-
cally and a stand-alone device installed at
the remote location.
stallation will include a chassis card
[CAPTF] installed in the Point System™ lo-
cally and a stand-alone device installed at
the remote location.
SAPTF33xx-1xx
stand-alone network interface device
Features
Audio Transmission
Caller ID
Automatic Ring Down
Duplex or Single Fiber Options
REMOTE MGMT
LOOP BACK
see also:
POTS 2-wire Point System™ Slide-In-Module Media Converter
POTS 2-Wire Copper to Fiber Media Converter
POTS 2-Wire Copper to Fiber