Dataram 16GB DDR2-667 DRSM5000S/16GB プリント
製品コード
DRSM5000S/16GB
DRSM5000, DRSM5000D
16, 32, and 64GB Memory Carriers and DIMM Upgrade Kits
DRSM5000
24-Feb-10
Products in Family
DRSM5000S/16GB (1 x 16GB 1R Memory Carrier)
DRSM5000/32GB (1 x 32GB Memory Carrier)
DRSM5000/64GB (1 x 64GB Memory Carrier)
DRSM5000DS/16GB (8 x 2GB 1R DIMMs)
DRSM5000D/32GB (8 x 4GB 2R DIMMs)
DRSM5000D/64GB (8 x 8GB 2R DIMMs)
DRSM5000/32GB (1 x 32GB Memory Carrier)
DRSM5000/64GB (1 x 64GB Memory Carrier)
DRSM5000DS/16GB (8 x 2GB 1R DIMMs)
DRSM5000D/32GB (8 x 4GB 2R DIMMs)
DRSM5000D/64GB (8 x 8GB 2R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each DRSM5000D upgrade consists of a matched set of
eight DDR2-667 Registered DIMMs with
address/command parity functionality. One 2K-bit
EEPROM is used for Serial Presence Detect.
eight DDR2-667 Registered DIMMs with
address/command parity functionality. One 2K-bit
EEPROM is used for Serial Presence Detect.
Each DRSM5000 upgrade consists of a matched set of
eight DDR2-667 Registered DIMMs installed on a
Memory Carrier Card.
eight DDR2-667 Registered DIMMs installed on a
Memory Carrier Card.
Dataram Product
Sun Microsystems Product
Supported in these Sun Microsystems systems:
DRSM5000S/16GB
DRSM5000/32GB
DRSM5000/64GB
DRSM5000DS/16GB
DRSM5000D/32GB
DRSM5000D/64GB
DRSM5000/32GB
DRSM5000/64GB
DRSM5000DS/16GB
DRSM5000D/32GB
DRSM5000D/64GB
SELX2B2Z
SELX2C1Z
SELX2D1Z
SELX2C1Z
SELX2D1Z
Not offered by Sun
Not offered by Sun
Not offered by Sun
Not offered by Sun
Not offered by Sun
SPARC Enterprise M4000 and M5000 Servers
30.000
[1.181]
[1.181]
63.00
[2.480]
55.00
[2.165]
5.00
[0.197]
5.18
[0.204]
123.00
[4.842]
[4.842]
10.00
[0.394]
17.80
[0.701]
4.00
[0.157]
2.54 Min
[0.100 Min]
1.27 ±.10
[0.0500 ±0.0040]
3.94 Max
[0.155] Max
4.00 Min
[0.157] Min
133.350
[5.250]
Back view
Front view
Side view
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.