Bosch MIYN46 ユーザーズマニュアル

MIYN46 Wall Transmitter

Safety Instructions | en

Bosch Security Systems

User Manual US

970.035b | F.01U.278.521 | v2.0 | 2012.12

1.

Switch off the MIYN46 Wall Transmitter: take out the battery or remove the power supply.

2.

Dry up the MIYN46 Wall Transmitter.

3.

Clean the MIYN46 Wall Transmitter.

4.

Check its electrical functions.

In case of defective operation or any other technical incident for which no remedy is 

described in this manual, please contact immediately your local representative.

Appropriate safety instructions linked to specific risks are described in the corresponding 

section of this manual.

During maintenance operations, when the MIYN46 Wall Transmitter is powered and its casing 

is removed, the MIYN46 Wall Transmitter may not be left unattended.

The MIYN46 Wall Transmitter may only be connected to the electrical sources as described in 

Maintenance and repairs may only be performed in accordance with the instructions and by 

authorized technical personnel only. The sole possession of the User Manual US does not 

allow the personnel to perform any kind of repair on the MIYN46 Wall Transmitter. Take into 

account all the warnings and follow all the instructions displayed on the MIYN46 Wall Trans-

mitter and those which are printed in the documentation.Never try to use replacement pieces 

other than those authorized by the manufacturer of the MIYN46 Wall Transmitter.

It is mandatory to use the products specified in the present User Manual US to clean the 

MIYN46 Wall Transmitter. If you plan to use another product, only do so after having obtained 

the authorization of the manufacturer.

WARNING! Electro Static Discharge

The MIYN46 Wall Transmitter contains highly sensitive electronic components. It should be 

opened only in an ESD protected environment with respect to the following precautions:


Discharge yourself from electrostatic loads by touching a grounded conductive surface 

before opening the unit.



Avoid touching conductive parts inside the MIYN46 Wall Transmitter if not absolutely nec-

essary. 

Never let any liquid enter the system. In case of liquid spill inside the MIYN46 Wall Transmit-

ter, act immediately as follows: