Dataram 8GB(2 x 4GB) DDR2-800 DRH800R/8GB プリント
製品コード
DRH800R/8GB
DRH800R
DDR2-800, PC2-6400, Registered, ECC, 1.8V, 240-pin DIMMs
DRH800R
10-Jun-09
Products in Family
DRH800R/4GB (2 x 2GB 1R DIMMs)
DRH800R/8GB (2 x 4GB 2R DIMMs)
DRH800RL/8GB (2 x 4GB Low Power 2R DIMMs)
DRH800R/8GB (2 x 4GB 2R DIMMs)
DRH800RL/8GB (2 x 4GB Low Power 2R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 6.4 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 6.4 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each DRH800R upgrade consists of a matched set of
two DDR2-800 Registered DIMMs with
address/command parity functionality. One 2K-bit
EEPROM is used for Serial Presence Detect. Low-power
versions consume less power than DIMMs originally
released by the OEM and Dataram.
two DDR2-800 Registered DIMMs with
address/command parity functionality. One 2K-bit
EEPROM is used for Serial Presence Detect. Low-power
versions consume less power than DIMMs originally
released by the OEM and Dataram.
Dataram Product
HP Product
Supported in these HP systems:
DRH800R/4GB
DRH800R/8GB
DRH800RL/8GB
DRH800R/8GB
DRH800RL/8GB
497765-B21
497767-B21
504351-B21
497767-B21
504351-B21
ProLiant BL465c G5, BL495c G5, BL685c G5, BL685c
G6, DL165 G5, DL165 G5p, DL185 G5, DL365 G5,
DL385 G5p, DL585 G5, DL785 G5, DL785 G6
G6, DL165 G5, DL165 G5p, DL185 G5, DL365 G5,
DL385 G5p, DL585 G5, DL785 G5, DL785 G6
30.000
[1.181]
[1.181]
63.00
[2.480]
55.00
[2.165]
5.00
[0.197]
5.18
[0.204]
123.00
[4.842]
[4.842]
10.00
[0.394]
17.80
[0.701]
4.00
[0.157]
2.54 Min
[0.100 Min]
1.27 ±.10
[0.0500 ±0.0040]
3.94 Max
[0.155] Max
4.00 Min
[0.157] Min
133.350
[5.250]
Back view
Front view
Side view
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2009 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.