HID Identity iCLASS RW100 6101BGU0000 プリント

64-bit authentication keys are extremely secure. Readers and cards

require matching keys to function. All RF data transmission between

the card and reader is encrypted, using a secure algorithm. The

key management system reduces the risk of compromised data or

duplicated cards. Key management is made easy! All cards are

shipped with unique diversified keys, and readers are shipped

with compatible keys. All keys are derived from the HID Standard

transport key. While cards and readers with Standard keys are

interchangeable, the keys are highly secure. Cards can be made

unique by ordering with iCLASS

®

Elite formatting.

Custom keys provide the highest level of security, where cards and

readers are uniquely matched to individual sites or customers, and

are non-interchangeable. Combining Elite custom keys with our

Corp. 1000 can offer companies a scalable solution that can be

implemented in facilities worldwide.

Features

9292 Jeronimo Road

Irvine, CA 92618-1905

U.S.A.

Phone: (800) 237-7769

Phone: +1 (949) 598-1600

Fax: +1 (949) 598-1690

Homefield Road

Haverhill, Suffolk

CB9 8QP

England

Phone: +44 (0) 1440 714 850

Fax: +44 (0) 1440 714 840

19/F 625 King’s Road

North Point

Island East

Hong Kong

Phone: +852 3160-9800

Fax: +852 3160-4809

Circunvalacion Ote. #201 B

Despacho 2

Col. Jardines del Moral

Leon 37160, Gto.

Mexico

Tel: +52 477 779 1492

Fax: +52 477 779 1493

HID Global Offices:

© 2007 HID Global Corporation. All rights reserved. HID, the HID logo,

and iCLASS are trademarks or registered trademarks of HID Global in

the U.S. and/or other countries. All other trademarks, service marks, and

product or service names are trademarks or registered trademarks of their

respective owners.

Rev. 04/2007

6101

6111

6121

RS232, RS485, USB or UART to UART

RS232, RS485, USB or UART to UART

RS232, RS485, USB or UART to UART

iCLASS Card : Up to 3.25”

iCLASS Key/Tag : Up to 1.5”

MIFARE / DESFire Card (CSN) : Up to 2.0”

iCLASS Card : Up to 4.0”

iCLASS Key/Tag : Up to 2.0”

MIFARE / DESFire Card (CSN) : Up to 2.5”

iCLASS Card : Up to 4.25”

iCLASS Key/Tag : Up to 2”

MIFARE / DESFire Card (CSN) : Up to 2.5”

The RW100 is physically our smallest reader and is

ideally suited for mullion-mounted door installations,

U.S. single-gang J-box or any flat surface (Reader

will not cover junction box).

The RW300 is 83.8 mm (3.15”) square reader is

designed to mount to and cover standard

European and Asian back boxes.

The RW400 is designed to mount and cover single

gang switch boxes primarily used in the United

States and includes a slotted mounting plate for

European and Asian back box spacing.

1.90” x 4.04” x .80”

4.83 cm x 10.26 cm x 2.03 cm

3.30” x 3.30” x .75”

8.38 cm x 8.38 cm x 1.91 cm

3.30” x 4.80” x .85”

8.38 cm x 12.19 cm x 2.16 cm

Power Supply 5-16 VDC, Linear supply recommended

50/75 mA @ 12 VDC

-40º to 150º F (-40º to 65º C)

5% to 95% relative humidity non-condensing

13.56 MHz

Wiegand Interface 500ft (150m) 22 AWG

•15693 - read/write; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials,

•14443A - MIFARE (read only) and DESFire (read/write),

•14443B - read/write; 2k bit (256 Byte), 16k bit (2k Byte), 32k bit (4k Byte) iCLASS credentials

Configurable to 9.6, 19.2, 38.4, 57.6, 115.2 Kbaud

UL 294/cUL, FCC Certification, Canada Certification

CE Mark (Europe), New Zealand, Australia c-Tick

Pending Certifications: Taiwan, Singapore, Germany VdS

UL94 Polycarbonate

Warrantied against defects in materials and workmanship for life. (See complete warranty policy for details.)

*Dependent upon installation conditions.

The reader’s Wiegand output easily interfaces with most existing

Wiegand protocol access control panels. The same data is also

replicated on the RS232 output lines.The reader

reads standard

proximity format data from HID iCLASS cards and will output

data as encoded. When reading ISO 14443A cards

(MIFARE

®

/ DESFire

®

), the reader can be configured to output

26-bit, 32-bit (MSB), 32-bit (LSB), 34-bit, 40-bit or 56-bit Wiegand

formats based on the CSN (card serial number).

Rugged, weatherized polycarbonate enclosure, designed to

withstand harsh environments, provides reliable performance and

resistance to vandalism.

Colors - Black or Gray

Key Management - Standard or Custom

Selectable Output Type (for MIFARE cards)

Termination Options: 18” Pigtail or Terminal Strip

Programmable LED/Beeper operation

Accessory - Security Tool; 04-0001-03

MKT-RW100_RW300_RW400-DS-EN

For best results, please

print on recycled paper.