ABUS Xevox Profi VdS BW8010 プリント
製品コード
BW8010
ABUS Security-Center
BW8010
Xevox Profi VdS motion detector
Product highlights:
• VdS-certified
• Alarm memory
• First-sensor recognition
• Detection range: 15 x 15m for complete room surveillance
• Aperture angle: 90°, ideal for corner mounting
• Alarm memory
• First-sensor recognition
• Detection range: 15 x 15m for complete room surveillance
• Aperture angle: 90°, ideal for corner mounting
The Xevox Profi VdS motion detector is a passive infrared motion
sensor (PIR sensor). It reacts to all types of heat movement and
reports this to the alarm centre.
sensor (PIR sensor). It reacts to all types of heat movement and
reports this to the alarm centre.
The best place to install the equipment is in a corner, between 2 and
3 metres above the floor. The intruder’s possible direction of
movement should be at right-angles to the sensor. Unsuitable for
installation are all places opposite to sources of heat (e.g.: heating)
or a window. Do not install the motion sensor near to electric cables,
gas lines or electronic equipment that generates heat during long
periods of operation.
3 metres above the floor. The intruder’s possible direction of
movement should be at right-angles to the sensor. Unsuitable for
installation are all places opposite to sources of heat (e.g.: heating)
or a window. Do not install the motion sensor near to electric cables,
gas lines or electronic equipment that generates heat during long
periods of operation.
The viewing angle of the Xevox Profi VdS motion detector sensor is
90 degrees, and the detection range – depending on installation
height – up to 15 x 15 metres. You can vary the sensitivity of the
sensor with a jumper. In this way, you can define the number of
pulses that have to be detected before the sensor opens the alarm
relay.
The Xevox Profi VdS motion detector sensor has an alarm memory. If
the alarm centre is disarmed following an alarm, the LED on the
sensor that triggered the alarm lights up. Depending on the
configuration, you can also see which motion sensor first triggered
the alarm. Due to its reliability and high quality, the Xevox Profi VdS
motion detector sensor is VdS-certified.
90 degrees, and the detection range – depending on installation
height – up to 15 x 15 metres. You can vary the sensitivity of the
sensor with a jumper. In this way, you can define the number of
pulses that have to be detected before the sensor opens the alarm
relay.
The Xevox Profi VdS motion detector sensor has an alarm memory. If
the alarm centre is disarmed following an alarm, the LED on the
sensor that triggered the alarm lights up. Depending on the
configuration, you can also see which motion sensor first triggered
the alarm. Due to its reliability and high quality, the Xevox Profi VdS
motion detector sensor is VdS-certified.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.