Alcatel 990X 990X-2DALNL1-S40 ユーザーズマニュアル

製品コード
990X-2DALNL1-S40
ページ / 76
65
66
To switch between panels, select one of the following two ways:
Touch and drag the basic screen to the left to open the Advanced 
• 
panel. 
Or press 
• 
Menu key from basic panel to open option menu and touch 
Advanced panel.
Enter a number and the arithmetic operation to be performed, and enter 
the second number, then touch “=” to display the result. Touch CLEAR to 
delete digits one by one, touch and hold CLEAR to delete all at one time. 
You can clear the calculator's history by pressing Menu key and touching 
Clear history.
Touch 
 or 
 to view calculator history.
When some number or operations have been entered, touch and hold the 
entering bar to open a menu offering these further operations:
Select all
• 
To select all entered text
Select text
• 
To select what you want to select from entered text
Cut all
• 
To delete all entered text
Copy all
• 
To copy all entered text
Input method
• 
To select your preferred input method
Paste 
• 
(1)
 
To paste what you have previously copied to the 
entering bar
Getting connected
 ................
To connect to the internet with this phone, you can use GPRS/EDGE/3G 
networks or WI-FI, whichever is most convenient.
Connecting to the Internet
6.1 
GPRS/EDGE/3G
6.1.1 
The first time you turn on your phone with SIM card inserted, it will 
automatically configure network service: GPRS, EDGE or 3G. 
To check the network connection you are using, press Menu key on Home 
screen, then touch Settings\Wireless & networks\Mobile networks\
GSM/UMTS options\Network operators 
or Access Point Names.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone 
with the following steps:
Press 
• 
Menu key from Home screen.
Touch 
• 
Settings\Wireless & networks\Mobile networks\GSM/
UMTS options\Access Point Names.
Then press 
• 
Menu key again and the touch New APN
Enter the required APN information.
• 
When finished, press 
• 
Menu key and touch Save.  
(1)
 
 Option will not appear unless copy or cut operation has been made.