Aten PE6208G DCP2937 クイック設定ガイド

1

2

3-2

4

1 PE1108 / PE1208 / PE3108 / PE3208 / PE6108 / PE6208 / PE8108 / PE8208 

   Power Distribution Unit

1 Power Cord

1 Rack Mount Kit

1. Circuit Breaker Pushbutton

2. Power Sockets

3. Readout Section

4. Power LED

5. LAN Port and LEDs

6. Reset Switch

7. Grounding Terminal

8. Sensor Ports

9. Power Socket

• Browsers accessing the eco PDU unit must support SSL 128 bit encryption.

• For cold booting of attached computers, the computer's BIOS must support Wake on LAN or System after AC 

Back.

• For Safe Shutdown:

• The computer must be running Windows (Windows 2000 or higher) or Linux.

• The Safe Shutdown program (available by download from our website or on the software CD included), must 

be installed and running on the computer.

3-1

The eco PDU can be mounted in a 19” (1U) rack. To rack mount the device, use the rack mounting brackets that 

came with your device. The brackets can be screwed to the front or rear sides of the device, and then the unit can 

slide into the front of the rack, as shown in the diagram below:

To set up your eco PDU installation, refer to the installation diagram (the numbers in the diagram correspond to the 

numbered steps), and do the following:

1. Use a grounding wire to ground the eco PDU by connecting one end of the wire to its grounding terminal, and 

the other end of the wire to a suitable grounded object.

Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or static 

electricity.

2. For each device you want to connect, use its power cable to connect from the device's AC socket to any available 

outlet on the eco PDU.

3. Plug the cable that connects the eco PDU to the LAN into the eco PDU's LAN port.

4. If you are using sensors in your eco PDU installation, connect them to the sensor ports on the unit’s front panel.

Note: Sensors are optional. 

5. Connect the eco PDU's power cord to an AC power source.

Note: We strongly advise that you do not plug the eco PDU into a multi socket extension cord, since it may not 

receive enough amperage to operate correctly.

Once you have finished these installation steps, you can turn on the eco PDU and the connected devices.

Note: We strongly recommend using cable ties and cable bars to safely and securely route the cables attached to the 

front of the unit.

© Copyright 2012 ATEN

®

 International Co., Ltd.   www.aten.com

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd. 
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant    

All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer. 
Please visit our website to find the most up to date version. 

PE1108A / PE3108A

PE1208A / PE3208A

PE1108B / PE1108G / PE3108B / PE3108G

PE1208B / PE1208G / PE3208B / PE3208G

PE6108A / PE8108A

PE6208A / PE8208A

PE6108B / PE6108G / PE8108B / PE8108G

PE1108 / PE1208 / PE3108 / PE3208

PE6108 / PE6208 / PE8108 / PE8208

PE6208B / PE6208G / PE8208B / PE8208G

1 Software CD

1 User Instructions

Online Registration
International:
• http://support.aten.com
North America:
• http://www.aten-usa.com/product_registration  

 
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN   Ext: 4988  
United Kingdom:
• 44-8-4481-58923