Transition Networks SSEFE1029-100 プリント
Stand-Alone
Fast Ethernet
Use the 100BASE-TX to 100BASE-FX setting to extend
the distance between any two 100BASE-TX devices up
to 40 km (24.9 mi.) using single mode fiber. Or interface
directly with a 100BASE-FX compliant port on any de-
vice to provide a 100BASE-TX port interface.
Features
4
AutoCross™ [
4
Link Pass Through
4
Automatic Link Restoration
Specifications
Standards
IEEE Std. 802.3
Switches
Switch 1: Link Pass Through on/off
Switch 2: 10 Mb or 100 Mb operation
Status LEDs
PWR (Power): Lit for normal operation
F-ACT (Fiber Activity): Blinking = data reception on
the fiber link
F-100 (Fiber Speed): ON = link at 100 Mb
F-10 (Fiber Speed): ON = link at 10 Mb
C-ACT (Copper Activity): Blinking = data reception
on the copper link
C-100 (Copper Speed): ON = link at 100 Mb
C-10 (Copper Speed): ON = link at 10 Mb
Dimensions
Width: 3.25” [82 mm]
Depth: 4.8” [122 mm]
Height: 1.0” [25 mm]
Power Consumption
3.6 Watts
Power
External AC/DC required; 12 VDC, 0.5A;
unregulated; standard (provided)
Environment
0 – 50°C operating;
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed; C-UL Listed (Canada)
Regulatory Compliance
CISPR/EN55022 Class A; EN55024; EN60950 Class A;
FCC Class A; CE Mark
Warranty
Lifetime
Transition Networks’ speed selectable copper to fiber Media
Converter allows you to extend the distance between copper
based connections with the use of fiber optic cable. The ability
to select the speed of converter allows for easy migration from
a 10 Mbps network today to a 100 Mbps network in the future.
This converter is a true layer 1 device as both the copper and
fiber ports operate at the same speed setting (i.e. 100BASE-TX
to 100BASE-FX). For 10 Mbps applications, these devices must
be used in pairs.
Converter allows you to extend the distance between copper
based connections with the use of fiber optic cable. The ability
to select the speed of converter allows for easy migration from
a 10 Mbps network today to a 100 Mbps network in the future.
This converter is a true layer 1 device as both the copper and
fiber ports operate at the same speed setting (i.e. 100BASE-TX
to 100BASE-FX). For 10 Mbps applications, these devices must
be used in pairs.
SSEFE10xx-10x
SSEFE10xx-10x
stand-alone media converter power supplies
10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
Ethernet or Fast Ethernet
Speed Selectable Media Converter
see also: Ethernet or Fast Ethernet Speed Selectable Point System™ Slide-In-Module Media Converters
Ethernet
Use the 10BASE-T to 10BASE-FL speed setting (back-
to-back) to extend the distance between two 10BASE-
T devices up to 40 km (24.9 mi.) using single mode
fiber without a repeater.
Selectable speed setting:
The converter can be set to 10 Mbps or 100 Mbps. Both copper
and fiber ports are automatically set to the same speed.
and fiber ports are automatically set to the same speed.
Ordering Information
SSEFE1012-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm SM
(ST)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SSEFE1014-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SSEFE1015-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SSEFE1022-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (ST)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Single Fiber Products
Recommended use in pairs
SSEFE1029-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm TX/
1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSEFE1029-101
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1550nm TX/
1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Optional Accessories (sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-PS
Piggy Back Power Supply
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options
E-MCR-05
12-Slot Media Converter Rack
RMS19-SA4-01
4-Slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0” [127 mm]
WMBD-E
DIN Rail Bracket (Extended) 4.3”[109 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3” [84 mm]
WMBL
Wall Mount Bracket 4.0” [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0” [127 mm]
WMBV-E
Extended Vertical Mount 4.7” [119 mm]
10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX