Epson 9600 ユーザーズマニュアル

If paper feed or paper jam problems occur frequently, try one or more of the 
following solutions:

•

When you’re loading roll paper, make sure you line up the edge with the 
vertical row of holes at the printer’s paper exit. Always turn the roll back 
to remove the slack. See page 42 for more information.

•

For cut sheet paper, let the printer automatically load your paper so that 
it feeds correctly. Follow the instructions on page 77.

•

For posterboard, follow the instructions on page 79 to load the media 
correctly.

•

Make sure the paper is not folded, wrinkled, or damp.

•

Make sure the printer’s environment falls within the required 
temperature and humidity range.

•

Make sure the paper is not too thick or too thin. See pages 63 and 183 
for paper specifications.

•

Make sure no foreign objects are inside the printer.

•

Make sure the printer isn’t located in a brightly lit area. The paper 
sensors may not operate correctly.

If your roll paper is curled too tightly and doesn’t feed out of the printer, you 
can use the paper guides shown below to help it feed straight (two on the 
Stylus Pro 7600 and three on the 9600). 

Use the paper guides only 
if paper is curled and 
doesn’t feed properly. 
Otherwise, the paper 
guides may mar 
your prints.