Edge-Core ECS4810-12M EUK F0NEC4512000Z-C データシート

The Edge-Core ECS4810-12M is a Carrier Ethernet access switch ideal for Ethernet service demarcation, extension, 

and aggregation. The ECS4810-12M allows service providers to deliver managed converged services, such as voice, 

video, and data over virtual Ethernet and IP networks. With flexible combination Gigabit ports, QoS, advanced 

operation, administration, and maintenance (OAM), ITU-T Synchronous Ethernet (Sync-E), and support for extended 

temperature range environments, the ECS4810-12M adds value and builds differentiated services over Carrier 

Ethernet networks.

The Edge-Core ECS4810-12M is a carrier-grade aggregation 

switch that consists of 12 combination Gigabit Ethernet ports. 

Any of the combination Gigabit ports can be flexibly assigned as 

1000BASE-X fiber or 10/100/1000BASE-T copper connections 

to subscriber-side devices. The other ports can be assigned as 

network connections to service-side devices. The switch is ideal 

for locating at the edge of broadband-access networks to 

aggregate traffic from multiple services.  

All interfaces of the ECS4810-12M are located on the same 

panel, including the CIT (Craft Interface Terminal) out-of-band 

management port, external alarm input/output interface, and 

power outlets.

The ECS4810-12M is a carrier grade switch that provides dual 

power inputs for AC and DC power, with an operating 

temperature range from 0ºC to 65ºC. The fan-less design of the 

switch ensures noiseless operation and increases the reliability 

of the system.  

The ECS4810-12M is designed for high energy efficiency. The 

55nm switch controller chipset and Green Ethernet power 

saving features significantly reduce power consumption.

Support for dying gasp. When a loss of power is detected, the 

dying gasp allows 200 msec for the switch to notify the system 

administrator by an SNMP trap.

The ECS4810-12M supports G.8032 Ethernet Ring Protection 

Switching, with the ability for the network to detect and recover 

from incidents without impacting users, meeting the most 

demanding quality and availability requirements. Rapid recovery 

time when problems do occur is as low as 50 msec. 

The ECS4810-12M supports IEEE 802.1ag Connectivity Fault 

Management (CFM) and ITU-T Y.1731, allowing service 

providers to monitor end-to-end services, identify connectivity 

and performance issues, and isolate problems from a remote 

location without having to dispatch an engineer to the site. 

The switch also provides the capability to monitor service 

availability, delay, and dropped packets, for verifying SLA 

conformance for billing purposes, and providing advance 

indication of performance degradation before a service outage 

occurs.

The ECS4810-12M provides synchronization options 

optimized for cellular operators looking to backhaul their data 

and voice traffic from base stations to their core network over 

Ethernet transport.

The ECS4810-12M supports bit-layer clock recovery 

solutions, ITU-T G.8261 Synchronous Ethernet, and provides 

a highly robust hop-by-hop frequency mechanism.

The ECS4810-12M supports Two Rate Three Color Marker 

and Policing, Committed Information Rate (CIR) two rate, CIR 

+ Peak Information Rate (PIR) Traffic Policing, and drop or 

remark of priority tags for packets that exceed burst size.

The ECS4810-12M supports L2 Virtual Private Networks 

(VPNs) by using Q-in-Q functions, where an 802.1Q tag from 

a customer VLAN (called a CE-VLAN ID) is encapsulated in a 

second 802.1Q tag from a service-provider network (called an 

SP-VLAN ID). The switch supports the rewrite of VLAN tags 

for egress traffic when the ingress traffic is VLAN tagged.

There is also support of L2 Protocol Tunneling for STP, CDP, 

LLDP, VTP, and PVST+, with Cisco proprietary multicast 

address (01-00-0C-CD-CD-D0) replacement. 

Layer 2 PDU filtering allows a service provider to specify 

which Layer 2 PDUs are to be dropped at an ingress interface 

on a provider edge switch.