Edge-Core ECS3810-26T EUK F0NEC3526201Z-C データシート

The Edge-Core ECS3810-26T is a Carrier Ethernet access switch ideal for Ethernet service demarcation, extension 

and aggregation. It allows service providers to deliver managed converged services such as voice, video and data 

over virtual Ethernet and IP networks. With flexible QoS, advanced operation, administration and maintenance 

(OAM), and support for extended temperature range environments; the ECS3810-26T adds value to your network, 

and builds differentiated services over Carrier Ethernet networks.

The ECS3810-26T supports IEEE 802.1ag Connectivity Fault 

Management (CFM) and ITU-T Y.1731, allowing service 

providers to monitor end-to-end services, identify connectivity 

and performance issues, and isolate problems from a remote 

location without having to dispatch an engineer to the site. 

 

The switch also provides the capability to monitor service 

availability, delay and dropped packets, for verifying SLA 

conformance for billing purposes, and providing advance 

indication of performance degradation before a service outage 

occurs.

ECS3810-26T supports Single Rate Three Color Marker and 

Policing: Committed Information Rate (CIR) Two rate: CIR + 

Peak Information Rate (PIR) Traffic Policing: Drop or remark 

priority tags of packets that exceed burst size.

The ECS3810-26T supports L2 VPN by using Q-in-Q 

functions where an 802.1Q tag from a customer VLAN 

(called CE-VLAN ID) is encapsulated in a second 802.1Q tag 

from a service-provider network (called an SP-VLAN ID).

Supports the rewrite of the VLAN tag of egress traffic when 

the ingress traffic is VLAN tagged.

Supports L2 Protocol Tunneling for STP, CDP, LLDP, VDP, 

and PVST+, with Cisco proprietary multicast address 

(01-00-0c-cd-cd-d0) replacement.

Layer 2 PDU filtering allows a service provider to specify 

which Layer 2 PDUs are to be dropped at an ingress 

interface on a provider edge switch. 

The Edge-Core ECS3810-26T is a carrier grade aggregation 

switch consisting of 24 Fast Ethernet ports with 2 Gigabit 

combination ports.

All interfaces of the ECS3810-26T are located on the same 

panel, including CIT (Craft Interface Terminal) out-of-band 

management port, external alarm input /output interface, and 

power outlet.

 

The ECS3810-26T switch provides dual power inputs (AC and 

DC) with an operating temperature range from 0°~ 65°C. 

 

The fan-less design of the ECS3810-26T ensures noiseless 

operation and increases the reliability of the system.  

 

The ECS3810-26T is designed for high energy efficiency. The 

cutting edge switch controller chipset and Green Ethernet 

power saving features significantly reduce power consumption. 

 

When a loss of power is detected, the dying gasp support 

allows 200 msec for the switch to notify the system 

administrator by an SNMP trap. 

  

The ECS3810-26T supports G.8032 Ethernet Ring Protection 

Switching providing the ability for the network to detect and 

recover from incidents without impacting users, and meeting 

the most demanding quality and availability requirements. 

Rapid recovery time when problems do occur, is as low as 

50ms.